Search:

I have done some checking around and that seems to be the going rate. I did check on 6" snap lock metal duct at the local HVAC supplier and they had it for $5.60 for a 5' length. So thats about half...

I have thought about enclosing it for noise and may do that, however I do wear hearing protection and the noise doesnt bother me that much. I also built a remote control switch for it, so I can turn...

I am going to start to put together my DC setup using a 2hp HF DC. My shop layout is T shaped with machines running down a long wall (40') and my table saw near the center about 10' away from the...

Thanks for the replies. I am looking for ideas on how best to dry and store it for now. I dont know if it would be better to paint the ends and let it sit in the garage or to split it on the bandsaw....

Well the tree came down and unfortunately the main trunk got destroyed in the process. After looking at it, it was in bad shape anyhow. I did save the main uprights that are straight and about 6'...

I see some people changing there Jet and HF dust collectors over to 6" ducting to improve its performance and had a question regarding the output to the bag/filter. It looks like most have a 5"...

Thanks for the ideas. Mine is a fruit bearing tree. I want to save it and was wondering what options I have for drying it and resawing it. There are some smaller parts about 4" in diameter that I...

I just had to remove a pear tree in my yard for some construction and wondered if it would be good to use for wood working projects. The main trunk is about 8" for about 3'. I thought about cutting...

I did some research over at the OWWM website and found some references to setting them around .100 to .125 high. It seems that if you had them at .035 that would limit your maximum amount of wood...

Hi, I am in the process of restoring a old Crescent 18" planer. It came with some new knives, but not installed and I was wondering how high they should stick above the drum? Basically how thick of a...

Thanks for all the reccomendations. I think I will go with a seperate rip and crosscut thin kerf blade. I checked on Amazon and can get the LU88R010 & LU87R010 for about $100 total which seems very...

I have a Delta contractors TS and would like to upgrade the blade and was wondering if anyone could make some good reccomendations for performance and price. The current blade came on the saw when I...