Bob and others
got a vibration table and set the vacuum pot on top with a very light shake. Did not seem to make that much of a difference. the wood that i'm stabilizing is 250 year old oak that a...
Type: Posts; User: Kenneth Hertzog; Keyword(s):
Bob and others
got a vibration table and set the vacuum pot on top with a very light shake. Did not seem to make that much of a difference. the wood that i'm stabilizing is 250 year old oak that a...
thank you all for your help
I've seen most of the youtube videos and no where do they even consider vibration from the pump
helping to dislodge the air in the wood.
I would think that once you...
does anyone stabilize there own wood?
If so do they have any suggestions on how long the vacuum needs to be on?
doing some stabilizing myself and it seems that the vibration from the pump makes...
I use shatter shield bulbs in all florescent fixtures in the garage
for the reason stated above and saves a whole lot of cleanup time
Ken
Hannah
why not try sherline equipment
they have a milling machine which people make miniature ( running ) engines from
there may be more accessories available for these machines than a...
Yes I use a Metal lathe for turning wood projects
it is a sherline lathe and I have both CNC and manual models
they work very well for rounding stock then switch it to the wood lathe for finishing...
I use my mini excavator and straps with a cant hook
also works for loading the logs
woodmizer LT15 with diesel engine
Ken
Yes I have this item and did purchase it for the same use you are using it for
found that the light on the unit was a bit weak
had to attach another brighter light and it worked great
I used an...
Mac
thank you very much
I won't feel bad using it for turning projects
Ken
All I'm asking is what are they used for.
I'm a wood turner not a boat builder
there has been 152 views and no one knows ??????????
One person told me that the groove the center and run a rope...
I have a quick question
Is half round poplar posts of any value in the boat building industry?
I have a few that are straight grain and about 8 plus feet long.
Ken
Maybe what the problem is that the mandrel is turning in the head stock
assuming that it is a MT1 or MT2 mandrel and the whole works is stopped
not spinning on the mandrel.
Ken
If doug can't help send me a PM also
I have some that is about 10 yrs old
will send photos if you wish
Ken
Mike
I have a solenoid valve on my air system.
it is tied into the same circuit that I use to start my exhaust fan
when the fan runs so does the air system
if I don't want it I can shut a valve...
I'm V P of our local club. With that said I can assure you that there will be no wood turning going on till this issue is resolved.
There is no building insurance as well as liability for the...
that would be fantastic
in this day and age we should just say thank you
we would really like it
thanks
Ken
Ernie
I have flashcut controlling on all my machines. It is very easy to use and will except DXF files from any program.
easier controlling of bit placement than most other programs.
Ken
Jeff
First - the scott will work if you use a diamond drag and don't run the motor.
second - I've made them from leather ( laser engraved ) which seem to have lasted
third - the black tag that...
sherline offers them for there lathe
maybe they can be retrofitted for your application
What Tim said plus
take it to a local machine shop and see if they can help
maybe they can drill it out without damage to other parts
they make easy outs that may work also
Ken
Ray
As Jeff said they don't sell well but did one for the wife with Hummingbirds on it and flowers
turned out very well. Got the kit from Tandy and fancy stiched it together
Ken
Brian
General does make a duplicator for the powermatic 3520.
I have one for just such items.
Ken
Carl
If I were to do this job I would put the ball between two cups and
set it on the rotary. I would assume you are not doing a 360 so tape
the part that is not being engraved. OR tape it the...
mine must be special :D
Dan
21 was great 22 was a real piece of crap and 23 fixed what they left out of 22
ken