You can get a 110 volt mig welder should work on thickness up to 1/8 or so. Poul can get them in flux core wire that does not require a tank of shielding gas the downsize is the wire costs more. I...
Type: Posts; User: Ed Hazel; Keyword(s):
You can get a 110 volt mig welder should work on thickness up to 1/8 or so. Poul can get them in flux core wire that does not require a tank of shielding gas the downsize is the wire costs more. I...
For ripping make some quages that fit in your t slot and you can slide your fence up to it, kind of like an L laid down
make easy fast set up no measuring needed.
Except now 20 years later my wife wants to rip out the tile that I installed before therefore under the cabinets.
Get a good file that fits your chain, hold the same angle same number of strokes on each tooth. After several filings take to a good sharpener and they will use an electric sharpener and get all the...
Anyone use a liquid rubdown wax? My wax in a can keeps getting contaminated, dried out ect.
where is the shop?
Not an expert, but first you need to calculate how much power do you need? Do you need to run everything all the time?
2. Do you need to to come on automatically?
3. If you have Natural Gas I...
I see some high end cabinets now have brush marks. Just spray them with a good quality finish, good excuse to buy some spray equipment.
...
Putting up a website is the easy part. Marketing it is the real issue.
I would also suggest esty.com and I would start out with a Wordpress site to show your work you could also accept orders. If...
I still use the funnel my dad made in shop class 1948.
Glad the shop is doing well!
Should be straight forward many usually need a 3/8 or 1/2 ratchet to release the tensioner. Make sure that the belt is on all the way one each pulley so the belt is not riding on a lip will cut the...
I went through the same thing once a few phones ago turns out it was the phone. I left the battery out for a few hours and when I finally put the batt back in everything worked fine, my brother had...
Thanks I ordered a power jack for it.
Sorry should have stated that it will not run on ac power with the battery in or with the battery out. She also said it gave her problems before but started working again this happened a couple of...
My daughters gateway win7 computer will not charge anymore. Tried different battery and charger with same results. My gateway uses the same battery and charger so we have been charging her battery in...
Really like your shop!
You may want to lower your filter I usually clean mine when I empty the bin.
What fill sensor did you get? I got the one from Oneida but it only lasted about a year.
thanks for the replies
Kind of what I thinking
I recently added Paypal as an alternate payment option to my website, roughly 20% of the purchases are made with PayPal I see no spike in sales by accepting PP.
I really dislike the fact that they...
Not at all familiar with your set up but is it possible to run the coolant through a small gas water heater that would kick in at say 40 to 50 deg.?
Larry
I understand exactly whee you are coming from. I was an auto adjuster for an insurance company, so I have heard forever how insurance adjuster are out to screw everyone which is far from the...
UPS picks up everyday for virtually nothing and I get a cheaper shipping rate because I have daily pickup so in reality daily pick up saves me money so I do not know why PSI would only ship a couple...
They do have windows based tablets that you can hook up to a docking station and or have usb ports to plug in a mouse and keyboard not cheap
...
Just beware once it starts.
Once you have a backhoe you will need a dozer then a skid steer + attachments, then you will think you need a bigger backhoe and bigger dozer, and you thought woodworking...
Looking for wood screws and pocket hole screws that are made in the USA or Canada?
Also would be interested in recommendations for saw blades TS and MS as well as carbide forstner bits.
I...
I just keep a digital calipers handy and I can quickly measure the the piece and set my Wixey on the machine then I can pressingly take first cut.