I was going by the cutter width, not the plate thickness.
Type: Posts; User: Ken Massingale; Keyword(s):
I was going by the cutter width, not the plate thickness.
Thanks guys, I found the problem.
ME, I'm a moron! :-)
This is not the only stupid move I made this weekend, just the only one I made public.
Thanks Don, that helps.
I have the older version apparently, someone on mentioned there was a replacement.
Funny thing is, the chart shows info for the new version with 1/8 and 1/16 chippers.
I'll...
I'm familiar how they work Matt, I'm just not understanding how I have 4 huge chippers? "-)
Several years ago I was gifted the SD208 dado set.
I already had an inexpensive set, and I normally use the router table for dados and grooves, so I hadn't opened the SD208 until yesterday.
I have...
Absolutely. These are sized specifically for stacked firewood.
+++10 thousand
Did you keep scrolling down Kent?
I see around 200 profiles plus accessories.
Ken
Dollar Shave Club
Great razors and blades, super prices.
A 'ripping chain' is just a regular chain, sharpened to a 10 degree angle.
We bought a couple a few years ago for the same purpose. I had not considered issues since they would be under a roof.
As I was selecting a pair from the cheap section a nice lady employee asked if...
++++++++++
I still think goats is the best solution.
Heck, Amazon is renting them via Amazon Local!
http://hellogiggles.com/amazon-goats/
It is on routerforums dot com at /craftsman-manuals/40975-craftsman-manual-315-17430-a.html
You'll have to register to get to it. Hope this reference to another forum isn't a no-no.
It's CFM is the same regardless of the motor voltage.
Lots of the great ole stuff at http://thenostalgiamachine.com/
Enjoy
Ken
http://www.toolsparesonline.com/category/922-triton.aspx
+ infinity!
$450 for a dang thing to burn trash in?????
http://www.lowes.com/pd_263870-26463-40300H_4294607708__?productId=3481765&Ns=p_product_qty_sales_dollar|1&pl=1¤tURL=%3FNs%3Dp_product_qty_sales_dollar%7C1&facetInfo=
And Congress! :-)
In the Q and A's a Ridgid rep states that the 9" resaw in the specs is incorrect, it has 6.25 resaw capability, and no riser block is available. Also no fence.
I'm not fRED, but woodcraftbands has equal or better resaw blades than the Woodslicer for half or less $$$.
Ken
(They are not associated with Woodcraft)
I raise the bit higher then I want then back down to the height that I want.
(Be sure to remove the plunge spring for using the router in a table.)
For rabbits I have had good results with Liquid Fence 310 Deer and Rabbit Repellent but it hasn't worked too well with deer. Coyote and Bobcat urine pellets also work but go away quickly with rain or...
These Craftsman 5/8 100 foot rubber hoses are great.