Appears like may have a dead power supply for the laser. Not getting any volts on the DC output and the Vok LED light doesn't come on. Popped the cover off and the fuses test good and no obvious...
Type: Posts; User: Logan William; Keyword(s):
Appears like may have a dead power supply for the laser. Not getting any volts on the DC output and the Vok LED light doesn't come on. Popped the cover off and the fuses test good and no obvious...
A 2004 vintage Gravograph LS800 with fume extractor and a new, not installed Ruida DSP controller the seller had planned to install but never got to made it's way into my garage yesterday. Bought...
You're spot on about the electric needs, everything being required in conduit makes wiring more complicated but not horrible. Right now all the conduit is running on top of the rafter tie beams so...
My wife got a wonderful opportunity (new job) but it meant a dismantling of the old workshop, move to Chicago-land and now finally a rebuilding of the former workshop in the 2 car detached garage a...
The key is to keep the water from getting to the joint. Either take a rainstrip style weatherstrip and attach to the upper panel so that it hangs over the joint, any water running down the face of...
I bought some 4' 3 bulb fixtures off craigslist(came out of a strip mall developement they were gutting and remodeling) for 10 bucks each and put in the ballasts linked below and 5k kelvin T8 bulbs...
Awesome idea, probably gonna steal the idea for my Powermatic 1100 restoration once its done.
Without seeing a closer and in focus view of the broken corner to me it kinda looks like Garolite sheets, which is a compsite, resin material that can have anything laminated to top and bottom and...
I bought my slat wall accessories from KC Store Fixtures, was very reasonably priced plus since I'm just a couple hours north of Kansas City they showed up 1 day after shipping.
From my general understanding it is based on how they're taxed. Mobile's are generally taxed as personal property and not real-estate so they must follow Fed code while prefab(meaning factory built...
What I would recommend is putting boxes on the ceiling above where you want the power drops, then use cord reliefs/cord strain reliefs to hold bus drop cord and use that to come down from your box to...
We probably have upwards of 10,000 of them in use in our plant on production equipment, now they're generally being used on 1/8" or 1/4" lines with much lower volumes as they generally are providing...
Yeah amazing score.....and like Jeff said you'll have plenty of stock for pipe clamps!
I don't think you have enough room for the motorcycles, you should sell me that nice bandsaw and belt/disc sander combo :).....beautiful shop!
$1.90 per 10 foot??? Either thats a typo or they had a typo as the last time I looked it was right around $11.90 per 10 foot piece, if you really got it for 1.90 you got an absolute steal! As far as...
And most of the MDF manufacturers are switching to ultra low or formaldehyde free glues in order to promote their "green" image and help comply with the new regulations, specifically California's
And their manuals have vastly improved over the years too! The manuals for newer machines(at least their production equipment, CNC's, double end tenoners etc) are pretty good once you get past the...
What it sounds like to me is that your two tables aren't planar to each other, and if I guess at your description of inside/outside edge it sounds like the infeed table is sloped so that the side...
The cheapest septic system you can get out here that is approved is essentially a 1500-2500 gallon in ground holding tank with a level alarm so that you know when it has to be pumped, they won't...
If you're going abandon the other switch you need to figure out where power comes into the circuit. You've got 3 choices really....the light fixtures, switch 1 and switch 2. Once you figure out...
If you're switch has a red, 2 blacks and a white you most likely have a 3 way switch, is their another switch in the shop that controls those same lights? If so you're probably going to want to get...
I'm in the process of installing new lights in my garage/shop and took the Craigslist approach. I picked up 20 some 3 bulb 4' fluorescent troffer fixtures that were coming out of a building they...
I have an old fiberglass garage door and recently put 2" thick, foil faced iso foam on and it seems to have made a big difference. It took several hours to cut the sheets to size and glue them up...
I really like Menards but my biggest complaint is their tool selection. Aside from the nail/staple guns they sell what is in my opinion crap tools where as the blue or orange boxes at least sell...
I wouldn't worry about the threaded leadscrew and motor for your table speed, its IMO overkill. I have about a dozen T-130's in the plant I work in that are set up for tenoning and used rather...