Thanks for the confirmation on that Rhys... I would have layed money it was.. :) To soft is too soft and presents problems with splintering edges.. dents.. etc. as you stated. But the color that it...
Type: Posts; User: John Thompson; Keyword(s):
Thanks for the confirmation on that Rhys... I would have layed money it was.. :) To soft is too soft and presents problems with splintering edges.. dents.. etc. as you stated. But the color that it...
I assume that is linear meter with the 4" x 8" so 4" x 8" x 39.40". If sqaure meter that would be dirt cheap.. Not a bad price as the last I looked we couldn't touch one board ft. (1" x 12" x 12" for...
Like the contrast of the curly and paduk...
Nicely done... yeah.. as stated they definitely are charging and arm and a leg for the species here in the States...
Grizzly has never attended any shows but this one and Atlanta. Those are the two largest shows in the U.S. and they alternate years with next year being Atlanta as it was last year. But.. I believe...
Shellac on the inside is fine... it's an alcohol based product. The reason for not using oil based is the odor can hang around a long time as oil takes quite a while to completely "gas off" and with...
Measure the lid inside diameter go looking at the box stores for a galvanized can. Take a tape measure with you...
Nice little box..
Great looking piece of work....
Ditto Lou on Highland Woodworking as it used to be Highland Hardware when I first started going there in the late 70's. They can order any part you need for Steel City and I get my 8' SC jointer...
Definitely worth a two hour drive if you have never attended. You will see about all there is too see in WW'ing machines from commercial to shop use. Even if you are not shopping you will learn much....
Nice job Gordon... sturdy indeed..
Excellent job regardless of first project..
Nice job..
Nice job on these...
Nice... rock solid...
Even though I've commented on your website... this is one cool piece of work. It does have a Dali influence as I was very familar with Dali work in the early 70's... :)
Nice... I ca assure you the white oak will hold up well outside considering it is used for ship's beams and dock poles. The M & T eliminates any potential problem with glue "giving up" in weather...
Great work and an excellent result...
Thank you very much Brett and Sam... it is good to smell the sawdust after the winter lay-off. Got a deck stairs and a rail around it and there pool to do for dear friends but should be back on...
Good luck... and enjoy Ken..
Nice find Sam...
I've used both methods decribed by Gordon and Don... both will work. I would probably go the Scotch Brite pad with WD-40 method then follow up with wet-dry using WD 40 again as the lubricant.. Good...
Simple is good in my eye Gordon.. Nice job on the through tenons and I like the ebonized bottom contrasting the light top. Did a flat screen TV stand several months ago using maple and I ebonized...
Nice job Matt... the contrast is compatible..