Search:

Krylon makes a green "hammered-finish" paint that is surprisingly close to the finish color of my 1023 table saw.

I didn't use it as touch up paint, but painted some brackets that I bolted to it...

Vince,

If you do the adjustable fence and the fence goes on both sides of the blade, you'll end up with a big gap where the kerf changes with the angles.

If you want to change the angle of the...

This may not be the best way, but it worked for me...

Secure one end of the fence with a bolt/screw and that will be the pivot point.

At the other end of the fence, screw a block to the sled...

Well, if you're happy with the door/sawhorses, I'd have to say you're not missing anything.

In my shop, I like having an assembly table that's apart from my workbench. That way, if I need to...

To take it to the next level, run your shop vac through a cyclone (I use the Thein design on a 5 gallon bucket)...lets you sand for a long, long time without clogging the filter...

Can't offer much advise on respirators (I just use the face mask/filters that you can get at Home Depot).

I would recommend, however, recommend making an air filter for your shop to go along with...

Maybe an arm's length of separation helps with the appreciation?

When I make things for my own home (ranging from cutting boards up to the entertainment center and our front door), the response I...

When my 15" planer arrived, it was laying on its side in the back of the truck and had gear oil leaking from the crate.

I called Grizzly customer service before letting the driver take it off of...

One more vote for the Triton.

The 2 1/2 works great for hand held use (works well in the table as well). It isn't as loud as either the 690 I had or the Hitachi I still have.

It also comes...

I upgraded from a JDS (canister filtered) to a 2hp Oneida about a year ago and noticed a big difference.

There is more suction without a doubt but the JDS wasn't underperforming because it was...

Hmmm...I think I'd offer to buy it back at a discount to what he paid for it based on the inconvenience he's caused you and then sell it again...for your original price or better.

Here's my best...

Jason,

You might want to take a look at the portable cyclone from Oneida if space/portability is what's driving your decision.

My first DC was a JDS dust force with a cannister. It was great...

Because of they are segmented, they tend to be more forgiving of slight misalignment of the pulleys and they don't take a "set" if you don't use your tools for a while.

I've put them on a couple...

I've enjoyed reading this thread...lots of good thoughts about aptitude, talent, desire and the rest.

One thing that's missing, though I think, is that progressing in a craft requires a...

I've got a G0513 and, while I've done some resawing of logs (maybe 75 lbs max) on it, I don't know if I would try to try something that big with just the saw's table.

The next time, I will...

I have the 513 (no X).

It's a fine saw that has done everything that I've asked of it from basic scroll work with a 1/4" blade to resawing 4' x 9" mesquite logs without a problem.

The only...

If you can find one locally, you're more likely to get a better price.

I've bought a few planes off of E-Bay. Only one wasn't quite what was described. Even when you ask, sometimes people...