I have two of the PC 7518 motors. They have only been used in a router table with good dust collection. On both motors, I have replaced the speed control. These do not get used hard for extended...
Type: Posts; User: Jay Jolliffe; Keyword(s):
I have two of the PC 7518 motors. They have only been used in a router table with good dust collection. On both motors, I have replaced the speed control. These do not get used hard for extended...
That,s what I'm looking for in black...Wood door will be 5/4
Thanks for the answers. Not looking for the screening I'm looking for material for the frame. The reason why I'm making them is they want them to match their doors. Factory made doesn't...
Like it says...I'm looking for black metal screen & storm panel stock...I can find everything except black...Any help would be appreciated.
Because they slide into the wall...Lame Idea but they like them...This is an old house that they just changed all the single pane glass windows with insulated glass.
These will be exterior windows & will need a weather seal against the windows....I'm looking for some kind of sloped track the windows will slide in...
I have to make two windows 24"x24" that slide into a pocket on an exterior wall.
Picture pocket doors but windows. I'm looking for ideas of some sort of track that they would slide on. The old...
Two years ago I took a prescription for 12 weeks & the cost was 96,000....No shopping for cheaper & I'm glad it was covered by insurance after a short fight by the hospital...
Very nicely done .....
If you have a router & a slot cutting bit you could use a spline.
That may make it a lot easier to remove the pins.....
You can get these @ Lowes Or HD...If you can't find the radius ones you could put in square ones....Just chisel the radius out...
Mine does the same thing...Let me know what they say....
Just about all the cabinets I've make I use Birch plywood....Light side shows on the interior...Side panels I use what ever wood is for the doors & drawer fronts. I found it faster & cheaper to have...
Nice work Mike...
I have to make a few cabinet doors to match what is already there. These doors are 3/4" thick and have a rabbet on three edges. On the butt, top & bottom. The rabbet is 1/4" deep & 1/2" wide. Do they...
I guess they're about 250.00-300.00 a ton....40 lb bags
Well, seeing that I live on an Island & the price of propane is 5.65/gal looks like pellets would be cheaper...Thanks for the input....We don't want a cheep stove but can't really afford an expensive...
We have a wood stove & have to tend to getting, splitting and storing the wood. Getting on in age and were thinking on a pellet stove. Have no experience with one & was wondering what would be the...
Having the last boat to the Island at 5:00 is an inconvenience...Can't go out to dinner & a movie unless you want to take the Quick Silver as you said. A non-scheduled run is around 120.00 for the...
Some storm doors that I've put in had an adjustable sweep on the bottom. It could move up & down by loosening screws. That would let air in so it would shut.
Thanks for the replies...All the screen doors I've made, the screen is always on the outside. A house I've been working on now they had some made & the screen was on the inside which I found...
I know the door should be on the outside of the house but was wondering about the screen on the door itself....
Screen on the outside or inside....Seem where I live they're putting it on the inside which I find odd...
I have to do a deck that is about 500 sq'...They don't want to see the fasteners if it can be helped. What would you suggest as a hidden fastener. I've looked at the Cameo, Ipe clip fasteners & a few...