I have the Grizzly sliding table attachment and have it mounted to the cast iron table which makes it about 10" away from the blade. I know that by leaving the extension on gives you more surface but...
Type: Posts; User: Bob Potter; Keyword(s):
I have the Grizzly sliding table attachment and have it mounted to the cast iron table which makes it about 10" away from the blade. I know that by leaving the extension on gives you more surface but...
I use them on face frames. Because they are quick and easy and normally can't be seen.
This was a great show. It showed a very tender side of Norm. At one point he became very emotional and couldn't speak for a little while.
He inspired me when I first started woodworking and built...
Ok I know I'm bad because I'm not a contributor any more because I have not renewed. Hopefully I will because I can't send pictures of what I did because if I did I couldn't see what I posted.
Ok...
Well it didn't copy the second part but when it is over there should be more listed to click on that will show you more .Also if you just type in Jointech Smart Miter there is 4 parts to the video...
I looked up on line and found the video that I have. Now this is in parts so I don't know it it will copy all of them
https://www.youtube.com/watch?v=pP-ghKnOpSc if this doesn't work out than...
No I have not taken the fence off although if something would ever happen to the sled I have thought about using the fence. The fence is a channel inside of a channel, which makes it very strong when...
Yes I have one and the pivot point is at the end at the blade end and the indexing is back toward the other end. You can cut a board say 10 inches or any given length and miter it and what ever the...
Please for give me for jumping in here but Erick just wanted to compliment you I have never meet you but only know you from this forum. I remember back when you worked for MiniMax and there were...
Mark I had one that I bought new in 1986 and used it for almost every thing at first. I kept it until a couple of years ago. I did send for the kit. One thing about the new guard was that it had a...
I have a Incra 25" L.S. positioner and really enjoyed the video on changing over to metric. It helped me see just how it is put together. Always amazes me how it you follow the templates and go step...
Felder combination,
Bob
https://www.youtube.com/watch?v=siizGKx-Kk8
Hi all
For those of you who have siding table saws and have used the Fritz and Frons, I think spelling wrong but you know I mean. About have...
Great work, enjoyed watching you work.
Bob
I have the 3hs router and it was fine for about a year until the gear broke and can no longer use the lift. I intend to get it fixed but haven't yet. I think the new ones have a metal gear but not...
I've had my Ridgid sander for at least 15 yrs with no problem. I did redo the dust collection which helped considerably.
Bob
I think Peachtree makes the cast iron router top for table saw and router tables that is the 9 1/4 x 11 3/4.
Bob
I have used the bits for some time with no complaints. Have the Katana door making set that is probably 20 yrs old and still going strong.
Low prices and free shipping is hard to turn down.
Bob
Thank so much Sir for sharing. Very interesting and beautiful work. And thank you for caring about your customers the way you do.
Bob
I have had my Vega 52" fence for more than 25 yrs or so. Even after all that time it still performs like new. Sorry agout your problem with Vega. Hope it gets settled soon.
Bob
I went back to the original to be able to cut large miters and also to be able to use rip fence and in most cases without removing the miter fence from the sliding table. But I still use the plywood...
David I sure like what you did , good job.
Bob
Terence
I have the Grizzly sliding table on my table saw and I did what your talking about. I made a 4 ft runner to go in the left miter slot. I than put a 2 ft by 4 ft 1/2 inch plywood on the...
I have the same sliding table and love it. But there is slop in the detents. I use a small square to get it set at 90. I posted about his before and am planning to put a flip stop on the extension...
I have the Grizzly sliding table on my Delta contractor saw and really loved it. I paid $570 plus tax at Grizzly in Springfield Mo.about 5 yrs ago. The miter Gage and fence is made very heavy but not...