Search:

Frank, that's a very interesting method. Thanks.

John,

To date I've mostly used glue and course threaded drywall screws for 3/4 mdf. My drill has a ratcheting chuck and I set it low to set the screw without spliting the material. I've also...

Thanks for the advise everyone. I really appreciate it. Gluing up a set of panels seems to be my best option, which leads to my next question. I've seen router bits that cut "glue" joints. As I...

I'm to the point in my project where I need to make cabinet doors and would like to have raised panels. The cabinet is made of oak plywood and solid oak for the face frame. I plan to use solid oak...

Thanks for the info Jim. Is there a particular brand of compressor you would recommend over another?

For years I've applied finishes by hand but would like to learn more about using sprayers. Until recently all my projects have been small so brushing on a finish was not big deal. They looked good...

Tim,

I've been thinking about this sprayer for some time now. Will it handle latex paint if thined enough?

Terry

I checked the arbor and motor and both turn freely. I'm using an anti-vibration link belt. It looked a little loose so I removed a couple of links and tighten the belt. The blade and fence are...

I recently came into an older model Craftsman 10" table saw with a 1 HP motor. The saw had a smaller blade that worked fine but when I installed a new 10" blade the motor did not seem to be able to...