Good evening! To "pop the figure" on Curly Maple, and Curly Mahogany, in the past I used Boiled Linseed Oil cut 50% with Mineral Spirits applied as a first coat. What about using Dewaxed Blonde...
Type: Posts; User: Phil Winn; Keyword(s):
Good evening! To "pop the figure" on Curly Maple, and Curly Mahogany, in the past I used Boiled Linseed Oil cut 50% with Mineral Spirits applied as a first coat. What about using Dewaxed Blonde...
My adult son is looking for someone to teach him about spray finishing. He currently owns a generator, a HVLP Gravity gun, and a small suction (pot under) detail gun. If I may say so, he is quite...
Please count me in!
Phil
Howard, which epoxy-brand name, item #, etc did your company use?
Thanks,
Phil
Which glue is suggested for gluing Curly Maple Ladder Back Chairs? The joints are M & T. Open time? Not sure exactly! 5 min to 20 min? Probably an average of 8 to 10 minutes? (Chairs will be...
My lovely wife wants to buy me a gift.....thinking about Edge-Trimming Plane(s)....
1. Lie-Nielsen Bronze Edge Plane--right handed and left handed-95RH and 95LH;
2. Lie-Nielsen Skew Block Plane...
I want/need to build a Master-Bed for my wife and I…while currently we have a queen sized bed-and are very happy with it – we were thinking about one of those “adjustable foundation” beds, and the...
You are a good man Jerry Bittner-we all can learn from you-
Phil
My wife wants to buy me a circular saw - Festool TS55 or a TS75; or a Compound/Multi-Bevel/Sliding/etc/etc Miter Saw; or a Fein Multi-Tool; or a _________________? (A combination birthday and holiday...
Wow, I think this is the first time I won something! Pretty exciting,
and what a nice prize.....what do I need to do now?
Thanks,
Phil
Veneer---storing veneer—
Need some suggestions on how to store veneer for the long term. Presently, I have a few 4 foot by 12 foot by 1” thick plywood - framed and supported shelves, where I...
BL....To rip boards, I just lossen the mitre and slide to the left...
Ya Blue is from Rockler, got it with one of their 25% off coupons.....let's see, Red full price OR Blue from 25%...
Yes you are correct. I have the Incra 52” TSLS Table Saw Fence system--and the rails just slide over....or you can cut them "like butter" (just Alloy). I really love the Incra system for my...
Question was: "sawstop and Jessem
I am wondering about your setup.
Did you remove the left table extension or just add it to the left. Did you move the rails or was there room.
I am wanting...
I have both - my SawStop and my Jessem Slider fit together perfectly and work great. It took a total of 25 minutes from box to using it! For me, no drilling, no modifications; it was a piece of...
I own an Oneida Bag Gripper, and I need to purchase some more plastic
bags.....I contacted Oneida, and well their replacement bags were super expensive-10 for $25.00 plus shipping; they claim their...
The current issue of Fine WoodWorking has a review of workbenches.....
Phil
Guy Germaine is quicker with a keyboard than I...
Phil
I can't really picture the stool in my mind, but how about:
1. Filling each hole with a 1 9/16" contrasting plug-and redrilling;
or
2. Drill out the holes to make a larger hole-than fill & glue...
I am planning on doing this tonight--any problems with it?
1. Using Unibond 800..glue 1/42" Figured Eucalyptus to 1/4" poplar
2. glue 1/42" Figured Eucalyptus to 1/4" poplar
3. glue 1/42" Figured...
Is your link mis-spelled?....."..work"....
Phil
Thanks all! Tuesday morning UPS will show-up with two packages by 10:30 AM—and Tuesday will be the next dry day to work outside. Fortunately, we finished the sections we started by the end of the...
Great donation John!
Phil
Thanks DP and JL. BG-perhaps could use a nail set-but worry that the
nail head wouldn't lay flat on the Tyvek. I am replacing some siding on a house; but only the siding below a certain...
RM,
Rockler,
www.rockler.com
sells some "hot melt adhesive", part # 50484, which you use an iron to activate. I have never used the stuff, but....
Good luck,
Phil