Hi Steve,
I had a thread on a lumber cart a little while ago.
At the end I show what I have built. Keep in mind the bigger it is and the more it holds the heavier it gets..... I had 5 sheets of MFD...
Type: Posts; User: Vince Rosypal; Keyword(s):
Hi Steve,
I had a thread on a lumber cart a little while ago.
At the end I show what I have built. Keep in mind the bigger it is and the more it holds the heavier it gets..... I had 5 sheets of MFD...
I would consider higher frequencies as 250-500Hz and above
Not sure where specific tools fall in the Hz range.... I tried a quick google but no love
You will hear a difference but it will not...
Yes what Frank said.... it's a complicated topic
If you are primary concerned with high frequencies (even some spoken voice) then fiberglass will help.... if you can fill the void completely with...
Another system for DIY MFT that I bookmarked
https://www.youtube.com/watch?v=aUMgllneNEU&list=PLgtrVpYlABJC0vP4iVkMjPCxwpyVH7C9x&index=17&t=11s
This is what I have currently...... old metal desk lifted to outfeed height with casters and 2 3/4" sheets of plywood laminated together to make a huge 4x8 work surface.
Is my interm bench /...
WOW very nice!!
Thanks James
Thanks Fred
Thanks David.... I think with a different band saw blade I could have reduced the extra effort.....
Thanks Bill, I agree with the base comment but I must have used up all my creativity drawing...
Hello,
I'm pretty happy with how this turned out..... learned a few what not to do's along the way.
Red Alder scraps I had hoarded
One big issue was the bandsaw blade I used (believe it's a 1/4...
Brought home a "load" of birch, fir and cedar and my grandfather's drafting table from BC after a much needed vacation. Awesome part is all the wood was FREE
Yesterday my daughter (7) and I started...
Stars are the thread rating.... rating can be applied at the top of the thread
Thanks Doug, Very good to know.
Thank you for the explanation
I am thinking the Swedish Silicon as I can get a 1/8" width 14TPI..... I think that's what I should have used for cutting out...
Good point
46 with a 7 year old that I hope one day shows an interest in WWing.
More than likely it will be the requests to build things like mom does.
I'm not good enough to try to teach anyone.....
Hello,
Does anyone have any feedback on R&D Bandsaws a Canadian supplier?
I am looking at ordering a sanding mop and a blade from them.
On there website that show several different types of...
I believe the fundamental problems are that
1) Everyone has their own opinions on what an "intermediate" magazine may look/feel like.
2) People are at various stages in their wood working.......
Very Nice, great job
This is also on my Huny Do list..... one day
Worked on re routing eves trough and sump pump drainage lines. Watched a few more episodes of Spartacus season 2 and started 3
Still working on the 25 dice.... filling the holes with paint is...
I decided to try some Aspen and Spruce (aka dimensional lumber) I'm going to build two night stands one out of each species.
One problem I discovered last night is that although I thought I was...
4 out of 4 comments are for having the saw fence proud
1 try it
1 showing off LOL
https://www.youtube.com/watch?v=zP3kt42bzTo
Thanks Eric,
Yes throat plate is certainly on my short list.... had tooooo many pieced fall in the opening already
Good to know your thoughts on the fence
Thanks Sam
LOL necessity was the mother of invention for the extensions.... but yes I am proud of it
True that!! Analysis Paralysis
Just curious what others are doing for saw being proud...
Thanks guys, how much would you say is practical to have the saw forward of the extension fences?
I was thinking of adding some 1/2" MDF to the saw fence to act like a zero clearance like what Dan...