Search:

Hi !

I have a LaserPro Mercury...

After 14 years of work the Y axis motor is on warmed and does not work well ..:(

Still spinning, but has no power to move the mechanism. (I think some...

Hi Lars

Would you know tell me that uses mirrors or lenses DOUBLE laser tube Synrad?

Thank's

Hello Jerry
They are very good ideas that I also had in mind (especially thelight, but using LED strips).
I have practiced other opening on the left side.
In order to introduce pieces (in my case...

A link where to find drivers and firmware..
http://soporte.perezcamps.com/GCC-LaserPro/

and another 'door' of Jorlink that Google found :):
http://www.meistergram.com/page.aspx?page_id=49

Hello Jan
Sometimes just a matter of tightening a screw.
Check that the belts are properly tensioned.
Luck

I that takes less time to perform the test,
Before starting the machine,
displacement head manually to the lower right corner.
Then turn on and the test starts from that position.
will save about...

Hello Richard.
I have the same Laser machine.LAserPro Mercury L-30
Last year I bought a Lens 4 " with aluminum frame (199$) to OEM OPTICS,
(Everything perfect)
Now also sells on ebay.
This is...

For the auto focus pin in http://www.jorlink.com/products/509

Wow! is a lot like the grill I have.
The grill took the light of a fluorescent tube that was in the trash.

It's like wanting to build the chassis of a car Opel to install a Ferrari engine.:confused:

Not worth the effort.

Best look for 2nd hand machinery using laser RF. , Like laserPro ,...

Hello,
The problem is plywood glues used.
Behave like mirrors to the signal of the IR laser,Then we need much more energy to cut.
The urea glue, adsorbs better laser radiation, and cut more...

Hello, I have a old Mercury L-30 Machine with a Synrad 48-2 ..Works well but
Would it be possible to change the laser tube for a coherent Diamond G100 or G50?:confused:
because the laser tube...

Hello Peter,
I have read your message and wanted to make a query.
How to set the USB adapter to LPT?
I also have a Mercury L30 and buy a USB adapter to Centronics the mark BAFO BF1284, to use my...

I've been able to solve the problem,
I had deactivated the LPT of the bios and also usually an IRQ conflict.
It is running like a dream.

Thank you very much.

Thank for your help.
Last nigth , I've found the problem, in the configuration of the bios of the computer, was not reflected the LPT port, and also had an IRQ conflict with the soundcard and the...

Hello Richard,
I buy a laser Mercury last day and I try to install the drives on my w98 computer, but only can install on serial port,
Do you now , how to install on LPT port? :confused:
Thank's...

Thank you all for your responses.
I hope that at least can cut Spruce or rosewood 3 mm or 4 mm of thick.
This Mercury have got 30W of laser power.

So , How many laser power i need to cutting a 20mm of wood ?
Thank's

Killor

Hello, I searching this web at have a tutorial IR Optics Handling & cleaning.
http://www.iiviinfrared.com/tutorials/optics_handling_cleaning.html
and used acetone or isopropyl alcohol to clear.

Thanks for your advice,
we will go on to the difficult, of course :D ! cutting, cutting, jeje!!
Begin cutting cardboard to take management.
What type of lens is the most common ZnSe or GaAs ?
...

Hello Robert, I also waiting my Mercury machine,
I winner in one Auction on eBay..:D

I never used a Laser engraver machine,
I hope it is easy to use.

Greetings from Spain,:)