Sistemi will have blade blanks for custom profiling.
Type: Posts; User: STUART Robertson; Keyword(s):
Sistemi will have blade blanks for custom profiling.
If your base frame is already assembled a biscuit jointer,if you have one, can cut the slot where you require it for z type table top fastners.
Fastners are usually zinc plated,you could use an...
That's correct 1/4 radius =1/2" bead.
Sorry for asking but will you be hand feeding or do you have a power feed?Hard not to get stop start marks hand feeding. You'd also need feathers or other hold...
How do you achieve fine placement of the blast for more precise or delicate work?
Are the air volumes required still the same.
I want to accentuate the texture of the grain by removing some of the summer wood.
What methods have people used for doing this?
If sandblasting,what sort of setup and blasting medium?
You can certainly add handles and they can make the boards a bit easier to carry.I have used cupboard handles in the past,there is a vast choice of shapes,styles,colors and sizes.
They can also...
Out of curiosity I measured the runout on both my shapers.They are 1 1/4 shaft.
There was a tiny amount,about the same for both.None would be better but neither have any appreciable vibration.They...
I may well be looking for hen's teeth...
There are fixed guides and moving guides...
Ceramic are usually in the fixed category.
I read yesterday, but now can't remember where(should have screen...
Euro guides are able to rotate,but barely or briefly do as they are not in constant contact.
I know I can get something from SAC,those ones are fixed,I'm wanting to know about ceramic euros that rotate in the usual way euros do.
Is this happening while it is untooled?
Is it a manually adjusted speed system ie. you have to shift the drive belt from pulley to pulley?
Bearings,dry bearings,bent shaft(fairly unlikely but...
Forgive this query...
When you did a dry fit prior to gluing did all the mating surfaces fit well and did you oppose each jointed face,and did you clean the biscuit slots and faces?
A profiled glue...
The bostik products are both dry types and flash off almost immediately, and yes on blades needs repeated applications.
The surface product lasts much longer and significantly reduces friction,...
I have a laguna but also a larger,older saw with euro guides a bit worse for wear which I want to upgrade or repair.
Although ceramic,the laguna doesn't have euro guides and don't think the felders...
Material being compressed onto the blade and tyres by the bearing type guides effectively crowning the tyres causing it to track....maybe.
Better dust extraction, some kind of stick lube or even...
Cat's can be skinned in many ways...by all accounts...
Spindle turning really is significantly different to bowl turning.
Watch Curtis Buchanan (if I remember his name correctly)turning chair...
I note that there are euroguides with ceramic facings. Apparently these rotate as euro guides ordinarily do.
Other stuff I have read suggests that NO they shouldn't rotate.
Maybe it doesn't matter...
Great feed back thankyou.
I'm often using partially seasoned DF and other unseasoned species and note there is some build up in the gullets.
I also have concerns about any effects on the tyres....
I use Bostik Blade coat on my circular saws and moulding heads.
And Glide coat on tool beds.
Was using my newly functional bandsaw today ripping just under 14" so tried a bit of blade coat on it....
You can probably get the motor rewound/rebuilt.
May or may not be cost effective...
The temperature of the glue and material at that time was probably in the low 40's. I had been using another yellow glue tolerant of low temperatures and this was my first use of TB3.
It has been...
I had read an earlier thread mainly about TB 3 and was a bit concerned by the mixed reviews,particularly with regard to joint failure. It's always good to know what limitations others have found and...
All the curved lams have been exterior,all are mechanically fixed in place and have had water thin epoxy sealant followed by a four coat paint process.
West system for when longer open time required...
The "dime trick" is clearance to allow the waste to clear as it cuts.
I have used gallons of this for many laminated curves and many other glue ups in an array of dimensions primarily for external non structural applications.
And it's waterproof....
I apply to both...