The tri-lobe by Hannes Tool
Type: Posts; User: Richard Coers; Keyword(s):
The tri-lobe by Hannes Tool
I'd think an old horizontal mill with a vise on the bed would work well. They don't bring much money as most prefer a knee mill. $800 for this good example....
I knew there would be a "slick" discussion, but the rules of the contest were quite nondescript. LOL
Carpenter’s Slick
A carpenter’s slick is a type of chisel used with two hands to pare long...
16 1/8" long with no handle, 3 3/8" wide, and weighs 4.0 pounds
519784
I've hollow ground for over 50 years.
I meant the 90 degree elbow and the 2" shop vac hose adapter. My model 100 was old enough that it had no factory chip collector, just a deflector. So almost all the early models had to have some kind...
I like the casters better than choking down the chip shroud like that. Run some 11" wide poplar through there and the shroud will be full.
The thing about color in wood, is that it is never light fast and the colors dull and in poplar's case, all those purples and green will turn to shades of brown and tan over time.
How many times will the customer have you repair a broken joint before they take the work somewhere else? And how does it work when you tell your customers that you used a weaker glue so the joint...
You can try, super light shearing cuts, sharpening the gouges right before the finish cut, a wash coat of shellac before each finish cut, applying shaving cream that swells up the fibers and adds a...
What kind of tooling? Carbide scraper? A damp surface won't help them.
put a couple of paint on the steel.
For fine work you cut stencils from blasting frisket.
You are asking on a 6 1/2 year old post. Start a fresh post for better luck.
The best tip I ever got about gluing loose tenons in chairs was from a professional furniture repairman. He took an 1/8" drill bit and drilled from the bottom of the rung and aimed for the bottom of...
First item is a huge air compressor. Sandblasting is like cutting the end off the hose and wanting the compressor to keep up. So many people think waiting for a compressor is not a big deal, but when...
Boiled linseed oil will actually promote mold growth, because it's made from flax seed. That is of course if they haven't added a mildewcide in it.
"I would avoid name brand stuff, brand new, coming from China."
This is what you said, and I am saying genuine SKF comes from China. I don't understand how my statement is not appropriate. It may be...
I've never worked on a table saw that has hold down screws on the insert, and have made countless numbers of my own inserts. I make the insert just slightly snug in the opening and clamp down a board...
I ask the supplier.
You can run shorter boards through any thickness planer if you butt each piece to the previous, or run them on a particle board sled. Certainly cheaper than a 2nd machine!
When a bearing is "on its way out", it starts making noise. Usually through the entire rpm range and often most noisy at full rpm.
This may surprise you then. Gothenburg, 17 June 2020: SKF is making further investments in strengthening its manufacturing footprint in China for ball bearings. The investment is in-line with the...
Nealy every species goes a silver gray color and there will be light surface cracking and erosion. UV rays are the killer, that why houses are painted. Paint blocks the sun longer than anything else.
I just bought a fifth wheel camping trailer and now doing work at the camp. Both repairing and doing some little hobby work. I wouldn't be without the sustainers now.