Thanks! I'll mull that over.
Type: Posts; User: Bill Sherman; Keyword(s):
Thanks! I'll mull that over.
The grain runs up and down on the base pieces. the top is 17" wide and the base pieces are 15" wide.
This will be in an air conditioned house so hopefully there won't be a lot of seasonal wood...
I have a six foot long live edge slab of black cherry I'm making a coffee out of and need advise on attaching the live edge "legs"(only 12.5" tall). I have already cut the legs to finished hight...
I just got back from a road trip across town to buy a compressor. They did not have the MAC700 but did have the MAC2400. The 2400 was very nice and quiet,too. It is more compressor than I need and...
O.K. Now I'm looking at a Rolair FC1500.
I'm looking for a quiet air comp. I saw this 1.1hp 4 gal. twin stack hotdog oiled comp. at big box for $200. Does any one have this unit and can tell me how they like it? PC would not be my first...
The Grizzly 1183 says it is recomended for metal. it runs at twice the RPM of the 1276 that is recomended for wood - 2500 RPM vrs. 5000 RPM on the belt. Would you recomend the faster RPM? The Grizz...
I'm looking for a bench top belt/disc sander. The Rikon 50-120 ($410 - $500 ) looks good but one site that I read reviews gives it generaly positive reviews and another site gives almost all negitve...
Before and after. This is not a restoration, just a cleaning up to get it in working order. I flatened the sole, knocked the rust off of everything,sharpened the blade and sanded th black paint off...
Thanks, guys. I'll have to look at HD for a Buck Brothers blade. I worked on it a little tonight and it is cleanung up well. I would like to get the black paint off of the tote and nob. It looks like...
Hi,
I was looking for an anvil on craigslist and found a guy that had several for sale. When we got there he was around back in an out building. The anvils were right in the front of the shop and I...
Thanks guys. I think I'm going to make 24 x 34 to make use of the plywood I have. Is soft maple too soft for runners?
I'm making my first cross cut sled and from what I've seen they are made in all different sizes. What is the most common size? I'm thinking 24" x 32".
Thanks,
Bill
Thanks guys. I'll try one out of BB or buy one from Woodcraft.
I just set up my new R4512 ( my first table saw ). The stock insert is steel and very thin, 1/16". I was wondering what material other people were using to make a zero clearance insert for this saw....
I'm thinking Danish oil or boiled linseed oil/spar varnish/turpine mix that Schwarz recomends. If you are making the mix do you use gloss or satin spar varnish? The local borg has Cabots spar varnish...
Matt, how thick is your top?
I am building my first bench. It will be a mini Roubo (24" x 60") due to space. It will have a leg vice on the front and a Jorgy 10" vice on the end. The SYP top should finish at about 3 1/2" thick....
Thanks for all the info. From what I have read here I would pay the extra for the Jet.
The Rikon website says it is 1 1/2 hp. 230 volts ..... so this needs 220 power for a 1 1/2 hp?
I did notice one fit issue, where the legs attach to the ways was off a bit. Thats not a big deal especially at this price point. I did run the tail stock up to the drive point and they lined up...
I looked at this lathe yesterday and it looks exactly like the Jet 1642. It was on sale for $1300. Does anyone have any info on this lathe?
Bill
I know ......No pictures,didn't happen ........ so here she is ..........
218875
Thanks guys for all of the responses. Sorry it took so long to get back to you but I had to drive across town to Woodcraft. A funny thing happened while there...... I ended up buying the Lie-Nielsen...
I'm looking at the LV bevel up Jack plane as my first plane (not counting cheap Stanley block plane from big box) and the LV BU smoother as the second plane. These planes cost more than I would like...