Search:

1969, if there is a white wire connected to one or more black wires in that ceiling box, one of those black wires is hot coming in. That white carries hot to the switch and the single black wire is...

Try a different multimeter.

What problem are you trying to solve?

Sounds like they’re trying to say it won’t cure if shaded from the Sun.

Probably cheaper somewhere else, but I didn't spend any time looking. Get SW to color each quart after dividing a gallon.
...

My Mother had a knee replacement at 92 and a hip replacement at 98. She got along fine with both of them and they lasted her until she left at 107. She said they were just worn out. She was never...

Did you hold your phone up on camera?

I had a boat business back in the 1980's that included repairing fiberglass and bulding sailboards using both epoxy and polyester resins. I had an oversized air conditioner that could cool the shop...

The sky is crystal clear for the first time since they've been active, but the Moon is still up so the sky is a little bit too light to see the Northern Lights with bare eyes. I've heard it said...

Don't feel bad. I never even noticed that section and never even knew what a blog is. Still don't, and don't really care.

Restaurant suppliers and fiberglass supply stores sell sleeves of wax free paper cups. Probably on eBay too.

Thanks....

Another note for those new to epoxy: When even opening the top of colloidal silica thickener containers, wear breathing protection. The stuff is Very fine and floats in the air. You...

One question: What is neat epoxy resin hardener? I just don't understand what that means.

edited to add: As a correction to my earlier comment on epoxy, I should add a little clarification. ...

My experience as well, Andy. I haven't found an end to epoxy shelf life yet.

I'll ad another note about a cleaner. I had a boat business back in the 1980's where I sold boats and worked on them....

Great post Kevin, but I pulled out this one quote to ask for a comment to see if you worded this as you intended.

" the marine epoxies I have used have essentially no shelf life"

Gorgeous!!!

I was worried the last time we had a real estate appraiser for the county come through driving a Porsche SUV with a magnetic sign on the door, but was relieved to find out it was a confiscation from...

I keep assortments of both SAE and metric zerks in the mechanic shop. They need to be replaced more frequently than it seems like they out to.

Will they be redoing some of the lime plaster too? If so, I have some personal recipes they may be interested in.

I wonder if their parents owned that 3/4 million dollar boat.

Does the motor even have zerks on it? None of my Baldors do. I have one 1/4 hp Baldor that I bought cheap because the fan on it had been crushed on the TEFC motor. I needed it as a replacement in a...

While you have the zerks out, see if they will pass grease freely. If not, replace them with new ones.

EM is for electric motor

Screw the zerks out and see what it looks like. Probably won’t even need a half pump. You don’t want to put too much in. Best done by feel

I went over it earlier in the thread, and you even helped me decide back then. Priorities were as long lasting as possible while being the easiest to redo possible. The original stuff was very hard...

There are differences though. Our driveway is big enough for any size horse trailer to easily get in and out with plenty of parking, and has even handled semi-trucks once in a while. Over the...

EM8000 as first coats/primer and Totalboat Halcyon for topcoats. I had to look back through the thread to remember. There's probably a picture of the side of the sprayer box with the tip size and...