can anyone here point me to a trim router with a 65 MM body
2.559 inches for the imperial crowd
i do not see any size postings for small routers i am looking for a router that will fit a lift...
Type: Posts; User: lawrence dosson; Keyword(s):
can anyone here point me to a trim router with a 65 MM body
2.559 inches for the imperial crowd
i do not see any size postings for small routers i am looking for a router that will fit a lift...
Kriss
i installed one on my 443 version of the same collector it helped a little with the high-pitched scream part of the noise
i see no difference in the way the collector works
on my version...
Bill
I do not know if is the same co but I was in the same boat I knew what a Murphy bed was never heard of a Murphy door but it is simular because it is a hidden a door way to a hidden room...
Any one here have experience building a Murphy door or better yet many of them ?
I would like to find a good article with the hinge details
I have found some info on the web of different styles...
Yep I have that model jointer as said jointer itself is made in China bottom half is usa that is why the tag shown (on the bottom cabinet )says usa the jointer tag says China
That machine has two...
James
I wonder if that might be pig nut hickory the wood from them has that brown hue like your does and pig nut hickory is the same family but does not have the shaky bark other wise they look...
charley
I am assuming that you are allowing wood movement at your overlapping joints is this correct ?
in other words you have each board fixed at the base were as there can only be movement across...
right side to the wall as well I stand to the left out of the blade path for safety for me if that side was to the wall it would be very awkward
Joe
no any time I adjust the angle I do not use the dial I use a tool and measure the actual setting at the belt
adjustable bevel -- small square ETC
I usually only change it from 90 to 45 but...
Joe this is the one I have and I would buy it again in a heart beat the fit and finish on mine is flawless mine is about two years old
works really well for tons of stuff can not imagine needing a...
on my pole barn I ran them horizontal like mike did but I just used 2x4 s I placed them flush to the side of my poles 6X6s so I have flat wall instead of the pole protruding 2 inches
leaves a...
4 " through 7 " hanger brackets are available at Penn state industries page 62 in there current catalog from 12 to 16 dollars for a 5 pk.
the 4 " are available from most borgs
I used some of...
Gene
I bought the micro lux mini tilt arbor saw pricey yes also very well made with dust collection ability from micro mark also have used a proxxon very similar
Lawrence
Dennis
another vote for a thin rip jig I have the rockler works great as advised use it with a zero clearance insert
yes a shop built will do the same thing
I build lots of toys this is what I...
yes I have the 45000 my shop is R50 ceilings R25 walls and the floor is insulated also no overhead door
protected entry way the building is 32X48 I have 24 feet walled off hence 24X32so one wall is...
I have the HDS model myself bought last year for my shop in propane version
my heating guy said that the dust would be a real problem with the non sealed combustion unit
bought it from greenhouse...
Rich
there is a scrap yard for compact tractors called west Kentucky tractor parts
you might check them out just google west Kentucky tractor parts you might even be close to them
Mike
.
I lived south of Sarnia for ten or so years and brought wood through the sombra marine city border [to Canada] numerous times with no issues
I always ask the Canada border officers if...
Paul
MBF base 21.1/2 deep X 18 wide
arm above base 23 inches with the 8 inch blade on and touching the table depth adjusting crank is above that
looks like it would lower about 3-4...
Anthony
glad you got the lumber covered I do not know which direction you are from Detroit area these might be closer to you ?
there is a guy at Lapeer that sells a lot of lumber pretty sure he...
Bruce
I have the GO 443 11/2 HP unit with the vacuum tube on it seems to work ok the bag stays in place
and I like the dust collector seems well made with a nice fit and finish I believe the 440...
Andrew
new with 10 % off coupon is about the same price why take a chance on that one having a sand diet way beyond the sellers statement maybe it has already lost some of its suction?
usually...
I have good luck using a shop vac to suck glue into cracks what others said fix the fit first
place a rag over the shop vac end push it against the opposite side it will pull the glue right into...
looks like an English walnut ?
black walnut is different but the wood looks like a good find either way
any chance you or a family member would be able to cut it with a hi lift or crane rental
i did this very thing last sumer i had a large soft maple tree in the way of a shed remodel .
i hired a...