Search:

cool thanks,
dan

I finally got around to making a bench. Is there any difference between bench dogs? Any other accessories that would be useful for this bench?



192986

Album Pics:
...

Hi,

I have a 2hp Gorilla with a short run: 7" to 5" in about 8 ft, then a flex hose for another 6-10 ft. It is also connected to table saw with 5" flex.

I have been doing some planing and one...

I really liked the looks of their stuff, and was going to get their drill press... but had difficulty locating a local dealer. Woodcraft stopped carrying them. According to our local store manager,...

I have the Minimax FS35 and love it. I just got 150 bdft of 10" maple x 10ft long, and the 14" jointer is great. It also let me plane glueups >12" wide. The 14 and 16 are much more expensive than the...

mine does the same thing. It sinks when it fills. If you have not done so, you should consider getting the vacuum adapter that allows you to use plastic bags. It makes it much cleaner to...

I have feared that, but at 2 years, they are still aligned. I have to admit, when I change over, I am VERY gentle to avoid slapping tables out of alignment. I happened to check the planer...

I have the FS35 (14") and love it. The jointer table is huge, and very easy to use. The planer purrs, and sounds "solid" when in use. I wear hearing protection, and eye protection, and a...

Thank you for all the advice. I like the idea of pegging from the front of posts and the back of rails.. I will try to find a complementary wood dowel to use.

Ipe is amazing stuff... It is...

I built this bench out of ipe. The joints are simple beadlock 1/2 floating tenons in the frame and 3/8" beadlock tenons in the top. The slats are floating in 1/4" wide dados.

After building it, I...

Hi,

I am making a ipe bench / "pool chest" for outdoor storage of my kids toys. Kinda standard design... like this:

http://www.ipefurniture.com/shop/form.asp?pid=207&catid=&listid=5

I made...

Error code defined: 4 = voltage drop/swing > 5v internal to switch box.

Plan: sending out a new switch box

I will update with outcome of this fix...



Granted... but when they charge you...

This am I rechecked everything... blade distance, red cartridge key. I even dropped the armature (as it does when it triggers) and reset it to make sure it was seated properly.. I tried different...

The gap is very close.... I used the yellow spacer, and it JUST fits between a Forrest WWII. Definitely less than 3/32... I will play with it, but it can't get much closer... The Red key slides in...

Just a goon who likes toys... but the scope is really neat. :)

I do.. I actually have a oscilloscope meter with trending... I will check the outlets... But it is all new copper... so don't suspect much.

I also have a TED5000 with voltage trending... at my...

the tech explained that the saws were designed to run in garage shops... therefore taking into account cold environments. Correct me if I am wrong, but my understanding is this...

The tech said...

Hi,

I have a contractor sawstop. About 1 year old. During the winter it kept coasting down. I called sawstop and was told that it was because the sensor was cold. It never worked reliably, even...

still loving my minimax fs35, especially after my digital gauge mod.

I have the same setup... and love it. I only wish I had known about the new hybrid cabinet saw--- it is not much more, and appears to be a better saw...

That being said, I still love my SS...

I first built my own layover table out of melamine covered particle board, and it sucked. I couldn't even imagine trying to create an accurate cut-out and leveling it... As the capacity is not really...

Thanks,

Do you know how long a fastener I need for shingles... I am using a 7/16 stapler, stainless.

Can They go straight into a flat surface? osb or plywood?

There are a lot of fire...

The top is only 3/4" thick, so that is the travel that I lost. I still have about 2.5" maybe 3 inches... It is a little underpowered, so I don't anticipate using really large cutterheads...

I...

I am making a fort/playhouse for my kid. I want to use cedar shingles or shake for the siding... It is 6ft cubed = 144 sqft so I need 2 sq. I have a few questions...

Should I use R+R shingles or...

I had some issues with my Grizzly JP... and opted for the Minimax fs35. I used the same justification you have - I can't justify spending that much on a machine... and even discussed that issue on a...