yes slab doors, and the cores will not likely be mdf, most likely baltic birch
Type: Posts; User: bill walton; Keyword(s):
yes slab doors, and the cores will not likely be mdf, most likely baltic birch
I am looking at a project that consists of a bunch of flat panel doors, 23x84x 3/4 for cabinets lining the sides of a long closet/dressing room. They are to have a specific matched veneer on the...
thanks all. I also use Target Coating products almost exclusively applied with both a Fuji hvlp and an hvlp conversion gun. I'm just running up against a delivery date and am looking to farm a...
I have a couple pieces for a current project that call for an ivory lacquer finish. The customer has provided a color chip. Does anyone know of a business on the east coast of Florida that can...
I've got 10 20x90 panels completed that are multi-part veneer and have a lot of tape to remove. Not too keen on sanding it off and scraping is taking a 30 to 40 minutes per panel. Any good ideas to...
thanks for the tip. my doors are 24x80 and there are 22 of them. will try to post some photos as we move along
thanks all. The doors will be 24mm baltic birch core with commercial waterfall bubinga on the outside with commercial maple on the reverse. The edging will be bubinga on the finger pull side and...
I have a project that has large doors veneered with various species. The designer has called for a shaped edge finger pull on each door bur prefers not to see anything but the veneer face. If I...
I used him a couple of months ago.
for a piece that short, I'd joint one edge then scribe the a line along the middle of the other edge and freehand the resaw without the fence following your line, then joint the face and plane it to...
I've been using my slider for over a year and really enjoy its functionality. However I miss the fine adjustment available on the stop on my incra miter guage. Has anyone contrived a way to emulate...
Quality Plywood Specialties in Sanford, FL: 407-936-1955 also has a lot of nice hardwood in addition to a nice selection of veneers and sheetgoods. No connection except being a customer.
I'm behind schedule on a kitchen job, so I need to purchase drawer boxes rather than build. Anyone know a respectable supplier in the Southeast that they'd recommend?
TIA Bill
I searched first but missed the thread, sorry to tie up the server space. It's a good discussion .
Did anyone else see this info from the big Vegas show:
Of course, the big buzz on the show floor concerns the “stone-faced” tools from Steel City Tool Works. I spoke at length with Mark Strahler,...
I just got a message that Curly Woods in McKinney, TX is closing. I always buy product there when I go home to visit family in Denton. I purchased a bunch of QSWO and walnut there several months...
I'd be using an electric unit and my interpretation was that I'd need two 40A 240 ccts. We live in the Fl Keys and the tap water is never below 70 so There's not a great deal of temp rise needed. I...
Does anyone have experience with instant hot waterheaters. I'm looking for some recommendations on brands, sizes, etc. to balance against manufacturer claims.
Thanks in advance
bw
Dan,
If I picture your project correctly, there are slilders for pantries, made with false doors, that move in and out on sliders.These might be adaptable....
Gene. If it were mine, I'd pt the reverse taper on all 8 outside faces of the legs. That is kind of a favorite shape for me. I'm building a kitchen island now for a client that uses this motif.
I saw the note abot paypal but was looking for some order blank.
I saw the note abot paypal but was looking for some order blank.
I saw the note abot paypal but was looking for some order blank.
I saw the note abot paypal but was looking for some order blank.
How do I actually order an item?
Thanks,
bill