Roller skate wheels are harder and hold up better when the piece is heavy i do get some bruising sometimes so i leave extra wood to cut away later after roughing
Type: Posts; User: john taliaferro; Keyword(s):
Roller skate wheels are harder and hold up better when the piece is heavy i do get some bruising sometimes so i leave extra wood to cut away later after roughing
130 to 135 if you had ever seen the aftermath from a air tank exploding , well i turned mine down alot after seeing that video .
I would go to a machine shop and talk to them about rebuilding your tailstock .
On the rode again , so where does the 6040 come in ?
I used the rods out of car struts to make tool post also rear hatch struts for small rest . They are hard and free remember to drill a hole first and vent the pressure .
Keep reminding us about safety . I jerked the tailstock back from a small hollow form and the drill chuck didn't come . The bit did stay inside the wood ,but i have a reminder in the ways of my new...
Roller blade wheeles have a air chamber that pops loud when loaded to heavy . Roller skate wheeles are tougher but hard and leave some marks {bruising}. I neaver though about the skate board wheels...
A smaller cutter will get you a little more distance but get grabby and slow . The old saying about the weak link comes in here be nice to your gizmo .
If you fit a plug don't fit tell dried as it will not shrink at the same rate and will crack .
Bill , Dats funny mine has been on a shelf by the saw for 6 or 7 years . Didn't want to hit a nail with it as all i saw is city wood .
I used the same basic thing but mounted the post on the floor and to the wall so it just swings out of the way .
That would do it .If you pull it back to a larger diameter it would work again . They are sensitive to height and depth . Every problem ive had was a head slapper so don't feel bad . Congrats on new...
Pass them on to a gardener , drill two holes and let them go they will last a year or two and be enjoyed better than burning .
I use a belt sander on an extension . :D
Youll find the rooler blade wheels bounce with a heaver piece ,I have been using rooler sate wheels . Their wider also so less bruising .
Yes Leo is correct , i made mine like oneway's it locks tight .Their $ on just a banjo is not to bad either .
I drill angled holes for stools with a wedge that fits around the drill post and has a dowel up threw the center hole in the table . Simple and quick setup and consistent .
Ken , welcome to Sawmill .
I got a Don Pencil one that i use on little jet . Was having one of thoes and decided to make one for my big lathe 1 1/2 "8 i used a nut welded 11/2'' x 2' cold rolled with 1/2 13 threaded hole in...
Robo you forgot the wood store next door that has free wood always ,and the mountain view . I want a big Elm log ,she just looked at me sideways .Guss it's shirt and underware .
Well mine was 413$ or so . I found the laser on amazon 13. 00 and a new i phone at the local att . i use the old phone transfomer , pot it in with hot melt glue all the wires to a stick of cherry...
Bob , in case your wondering it's a bad idea to not lock the spindle . I made a post to hold electric saw that slides on the ways and plung ,and it has been working great for coring large pices . 36...
Better bet than a lottery ticket what $ is he asking for all of it cause you don't want one and find gold . You can always build a fire and stay warm for a few min .
walnut and elm , i had a picture on my phone of cherry that cracked and persimmon is worse yet .
Lift the chain up out of the bar and feel the drivers if their oiley your good . Make shure the oil hole in the bar is clean and the groove . I use bar oil it sticks better ,and my oiler is turned...