I agree wholeheartedly, Jim. In my experience, the less you add to cherry the better. I finish most of my cherry these days with Shellac, but oil finishes are nice as well.
Type: Posts; User: Ted Phillips; Keyword(s):
I agree wholeheartedly, Jim. In my experience, the less you add to cherry the better. I finish most of my cherry these days with Shellac, but oil finishes are nice as well.
I have found that the center drill bits break easily with cheaper Vix-style bits. So I went on ebay and bought a fist-full of the sizes I use regularly for my Brusso hinges.
TedP
I built some drawers for a cabinet at home out of Sapele a couple of years ago. I also wanted to darken them, so I padded on a couple of 2# shellac coats - using dark ruby shellac. As with...
I like Odies Oil. It is an interesting product. I don't think it ever gets completely hard, as folks have noted. However, the waxes in the mix are very hard (likely shellac and/or carnuba wax). ...
Jim - this is a new one to me. Can you tell us a bit about your experience with Z-Poxy?
For years, I've used the nearly 100% ethanol found in camp stove fuels and "indoor fireplace" fuel. They are not denatured with methanol (which is toxic) and instead rely on a bitterant which tastes...
One of the keys here is to use a wire brush and lightly go over the charred area. This knocks loose any ash. Personally, I would seal the piece with Shellac. Brush it on at a 1 pound cut and let...
I use West Systems epoxy for most of my work. For tinting, I normally use india ink for black and transtint for other colors. Lampblack or carbon black also work. Be careful of all the dyes and...
One thing to beware of: Ipe has a tendency to leach and stain whatever is under it, especially if it is kept wet. Make sure you put something under the planter to protect your flooring.
As to...
I have used the DMT DiaFlat lapping plate for years. It is expensive - but darned well worth it.
You might consider getting a 2" wide machine. This way, you can run either 1" or 2" wide belts depending on the task.
TedP
I'm with Phil here. I like TimberMate - it is water based, doesn't spoil in the container, and is invisible to almost all finishes. Just add a little water and stir to get a consistency of...
You might try one of the "hard wax" finishes. They don't seem to darken wood as much. My favorite is Osmo Top Coat.
Another vote for Wood Owl bits. They are affordable and cut really cleanly. They come in a couple of configurations and number of flutes. I like the Ultra Smooth tri-cut bits. But the...
Transtint has several good medium browns. I am partial to the Coffee Brown, but the Medium Brown and Reddish Brown are also good.
I keep waiting for them to sell paint in plastic bags to save a nickel.
John - you are absolutely right about Smiths. Their CPES is perfect for this application - and also it stinks to high heaven. I made the mistake of applying it to a small piece in the basement one...
I *live* in Virginia, and it is still too far for me...
TedP
I always cut my dovetails by hand. Mostly, I use the technique of a flat-sided half pin on the bottom of the box. This allows you to make a through-cut groove without worrying as much about the...
I made a largish mallet from three laminated pieces of hard maple - and white oak for the handle. It held together for a year, but split pretty badly along the glue line during its second year. It...
I was just thinking about this video as well. Louis Sauzedde is truly a master shipbuilder and knows a thing or two...
Actually, I would recommend G-Flex Epoxy by West Systems. It is what many knife makers use to afix scales to blades. It has a bit of flex built in to accommodate movement between the materials. ...
My wife just got the Veritas Pocket Plane for my birthday present. What a sweet little plane! I have started using it to do the fine tuning on jewelry boxes, rounding off sharp corners, etc. Very...
Also, don't forget to add an access panel or drawer at the bottom so you can empty the accumulated dust.
I agree with Phil. The quality hinges like Brusso are marvelous to work with and are very precisely machined. Well worth the money in my book. He's also correct that you can tweak the mounting of...