Search:

I second the recommendation for the Bostitch Flooring Nailer/Stapler ( pneumatic ). It is the best you can buy - as mentioned before you find one used on ebay or elsewhere. For me, there is no...

Are battery cells/kits available for Festool TDK drills? thx.

Cepco Tool makes some clever devices. Kudos to them. I bought and am using their QuikJack, for hardwood flooring. I cannot do without it, since even the most expensive flooring boards are not all...

Jay, if you do go to Orange, I would be interested in feedback on what you found there. thanks.

here it is:

http://rts-engineering.home.att.net/OF1400.pdf

That is a great idea. I should have thought of that. I used a thicker plastic hose, and had to search all over the place for a compression T that woud fit.

I installed an automatic drain on my compressor from harbor freight; it is $17. When I bought it, the price was $10. It drains the tank every time the compressor reaches max pressure, i.e. when the...

If you have a Home Depot nearby you might want to consider the Ridgid TS2400. I comes with a rollaway stand. There is a good comparison between the forementioned Bosch and the Rigid. It is slightly...

I love Stickley furniture, but cannot afford it... Did you build from plans, if so where did you get them?

thanks.

Ok, I asked this question at the festool users group, and got ignored! How is it that John has all these honeys? Are they all related to him? Or is he an extremely lucky guy? Not fair.

Thanks for your response, I am working on a flooring project... I thought I might needed to buy the scs. Regarding the price, isn't the scs is listed for $69? I am not complaining, just wondering.

Sorry, I am confused, can someone please explain the difference between a smart clamp and scs?

i.e. is sms = 2 more smart clamps?

Why could you not use smart clamps for a narrow stock? (Also...

If you want an ogee profile on the edge of the board then there is no "flat part" for the bearing, i.e. the bearing is hanging free beyond the bottom edge. With a router table fence, the rest of the...

Ok, will investigate the router/table setup... how about pc/benchdog?

I just had another thought, would either the E or F guides work in lieu of router table?

Thanks Richard,

Yes, for ripping use fence on the table saw. I was thinking in an ogee profile, there is no straight egde, no flat part; so what edge would the bearing use to guide the router?
...

Since I have never used a router before I was wondering If you might be able to give me some pointers.

I have to make my own birch cabinet moldings (since I cannot find what I need at the molding...

You could check out Eaton Compressors; the guy who did a glue up/milling job for me has a huge on in his shop. They have one for $725 that might fit your requirements. Since they can also build a...

I am interested in the drill, and have been waiting for a good deal on the panasonic 15v. How much power will I loose with the Festool 12v? Would the difference not be even greater since panasonic...

Festool saw on a Eureka EZSmart guide system...

You know I found the Sawmill forum, when I saw the EZSmart guide on Ebay and did a web search on it to find out what the heck it was.

A form of...

I have read the festool threads with great interest; I am starting a fairly big santos mahogany flooring project. I would like to get rid of my table saw (storage considerations) but would like to...

Thanks Fred,

So I guess if I get another one it will be the same. I am concerned about ripping thin strips, hence the q above.

The top is aluminum. I got it because it fits, and because I can move it around. I also got it before I found out about the festool system :( . But I like the saw, I have make several cuts with...

Greetings,

I have the above table saw. The table top is not perfectly flat. On either side of the blade, if I place a straight edge parallel to the blade, the center is higher than the edges,...