Search:

Does anyone have an installer for LaserWork/RDCam 5.021?

A few months back I installed a new version of LaserWork and my cutter has not worked properly since then. At the beginning of a job the...

I found my copy, I can send it to you if you still need it. Send me a PM.

Mason

I'm in the process of adding a new computer to our shop so I can control both our Velox CNC and Artsign laser engraver from the same machine but I seem to have misplaced the CD that was shipped with...

Nice work Zlatko!

I do a lot of backlit control panels for my guitar amps.

Typically I use IPI or Rowmark reverse engrave plastics and engrave the logo or text as a mirror image in the backside of the plastic.
...

Thanks for the tip Rodne. This will work ok with a 50W tube? I guess I would have to check current to find where my max is because I'm assuming that the highest output from this would be beyond what...

Thanks for the explanation Dan.

So I replaced the fuse and it just blew immediately again. I pulled the power supply last night. The PCB is for an MYJG-50W power supply from jnmydy.com. I pulled...

Thanks Rodney, your confirmation is much appreciated. I thought that was what was engraved on the base of the fuse, but I couldn't be certain.

Mason

Weird, I always engrave first then dye and finish. Have never had any problems working that way.

mason

Short Story: Anyone know what kind of fuse is used in a 40 to 60W laser power supply? I *think* it says 5A / 250V but I can't be sure, as the engraving is extremely faint.

Long Story:

I have...

It is also possible that your 'reverse interval' setting in your configuration file is work. My Artsign JSM-3060N was doing the same thing and it turned out that the reverse interval setting was...

Rodne,

Does LW 6 work on the same drivers for LW5? I'd like to try upgrading to the new version but I don't see any new drivers in the download.

Thanks,
Mason

I'm late to the party and it seems like all of your questions have been answered... but I'll chime in anyway.

When your machine tells you that you have run out of space, 99% of the time it means...

The front engrave black/white and white/black laminates have been problematic. But all of my reverse engrave laminates cut nicely and require only minimal cleaning.

That engraving was done at 423 dpi. The text is actually quite sharp (the characters are very small - less than 2 mm in height), but some of it looks out of focus in the picture because of the camera...

I'm mostly up and running on my Artsign JSM3060N. I've already done several jobs, with good results, but I have a questions on how to further improve my engravings.

1) Post engraving cleaning - I...

Interesting experiment. Also weird in the sense that when I enter backlash settings through the 'user' tab (that you pictured above) they make absolutely no difference in the scans for me. I've used...

No prob, glad it worked!

Hmmm... on my machine it seems to be a systematic error that is propagated relative to the object size - that is to say the percentage offset seems to be the same whether I make a 2", 5", 10", or 20"...

John and Rich,

Thanks for the very interesting discussion. I was originally trying to solve my problem using the menu that Rich showed in his attached image. I believe that this setting only...

Thanks Rich and John. I was just looking through the manual and concluded that I needed to change the settings in Config(S)/Systems/General - scanning (reverse interval) when I read John's post it...

Awesome. Super thanks! I'll try this tonight.

mason

hmmm, maybe... I'm not sure how/where to set that in Laser Works. I'll go through the manual again. Thanks for the comments.

Shift and right click on CorelDraw, then select "Run as Administrator" and it should work fine after that.

Mason

Glen, thanks for taking a look and commenting.

It's not easy to tell from the image, but the shadowing/border comes on both sides of whatever is engraved. So for example, on the 'G' on the...