I put R board up behind some OSB in my shop. I offset the seams and it made a world of difference (shop is an old garage/apartment building) in cutting the air flow through the room. I haven't...
Type: Posts; User: Shane Copps; Keyword(s):
I put R board up behind some OSB in my shop. I offset the seams and it made a world of difference (shop is an old garage/apartment building) in cutting the air flow through the room. I haven't...
This seems to be the issue. The work piece works up the tailstock center and walks away from the drive center and then it spins or tears out.
Thanks
Ok- This tells you how new/how long it's been since I have done any turning.
What I seem to have from your descriptions are a Drive Center with a point and 4 spurs. and for my tailstock I have a...
OK guys,
First, thank you for helping me with the centering issue. I remounted the log on the lathe (SS) like you guys told me to, Then as the lathe was chattering around a little vs. jumping...
Thanks guys.
I had the SS set as low as it would go (700)- I do have the older headstock. I was pretty scared to see the log go flying(it took off away from me) and that is why I'm looking for...
I turned a little in High School shop class (quite a while ago) and haven't done any since. I am going to try it again but I need some pointers from you knowledgeable folks. I put a log on my...
Put up and finished my set of built in book shelves for the office. As I'm not going to be in this house but another year, I didn't want to spend to much money on them. I used shelving for the...
Dave,
Not trolling, I guess Im just trying to get a feel for what everyone else does and hopefully get a better handle on what I want to do.
I ended up with a BUNCH of saw blades with a...
Is it worth trying to find someone to sharpen blades? I have a pile of them that I either need to get rid of or get sharpened so I can use them. Sharpening should be cheaper, right?
Thanks for...
Looks good
I'm looking for ideas.
I am in the process of buying a Hardware/Lumber store in MT and would like some ideas on what to carry. It is a small town (about 2000 people in the county and adjoining...
I would use the downstairs as my actual shop with wood storage and some tool/parts storage upstairs. I had almost the same downstairs set up in my old shop (16x24 shop in the back of a 2 car garage)....
Been working nonstop on the garage and shop- put workbenches on two walls and got some tools put where I can get to them. Now I'm waiting on the electrician to fix the power and i'll be in a lot...
Are you doing just the countertop? The whole island/cupboard setup?
I guess without knowing very much about your project or setup, I would start by letting the boards dry out (assuming they are...
+1 on the screws- Nails will back out within a short time.
Thank you very much everyone.
I really appreciate it. I ended up putting up a 5 ft and 3 ft gate in the 8 ft hole. Mostly it will be a walk through with the option of opening it for something...
Dennis
The new floor is 27x27 roughly. It has some insulation in it, but I'm putting up some r board and osb as the summer goes on. I plan on painting it white when I'm done.
Shawn and David,
I can split the one 7-8 ft gate, it would probably work better anyhow. The ten foot gate- I could just make it solid fence as the only real reason I was going to put it in is in...
Got it to work- Thank you guys for all your help- appreciate it
Shane
292406292407292408
Here are some pictures of what I am working with if that helps me get some ideas
I messed that up --- the inline pics are of the shop. The attached are of my other current project - Fencing in the yard. I have a question in the woodworking forum for that.
Thanks for letting...
292399292400292401292402292403
I'm trying this. Here are some pics of the new shop. It was an apartment building YEARs ago and the floor flooded so previous owners took the floor out and put...
Thanks Rich,
I will try that. The next question is how do I reduce the file size?
I am putting up a privacy fence and have gotten to the gates. I had planned to build a square frame, put a 45 board from the bottom of the open side to the top of the hinge side and then mount it to...
How do I upload pictures? I Reply to Post, Go Advanced, Manage Attachments, Add Files, Browse for the pic. and hit Upload. All I get is Upload failed. Am I doing something wrong? Can someone give me...