Do you hear a continuous hissing sound?
The most likely suspect in my opinion is the one way check valve,that's what went wrong with mine which exhibited the same symptom(tank never fills,air leak ...
Type: Posts; User: ken masoumi; Keyword(s):
Do you hear a continuous hissing sound?
The most likely suspect in my opinion is the one way check valve,that's what went wrong with mine which exhibited the same symptom(tank never fills,air leak ...
good one.:D:D
http://bloximages.newyork1.vip.townnews.com/roanoke.com/content/tncms/assets/v3/editorial/e/b3/eb30df2c-82ea-531f-9acf-9720796da12b/53ab969754089.image.jpg?resize=300%2C240
Looking 50 is great if you’re 60. Joan Rivers
Thanks Cary, it looks more like a universal edge guide that fits most compact dewalt routers but as long as it fits my DW611 it should be good.
For parts only.well, at least in my case.
I just bought a Dewalt 611pk,would really like to buy an edge guide for it but I've heard the DW6913 does not quite fit the DW611,if that's true, would you know what other edge guide would fit in it?
I bought one of these awhile ago but to be honest I haven't attached my CS to it yet, tested the plate and the attachment that came with it to see how sturdy it was, it rides on a progrip clamp...
Watching CNN lately more often than before and I keep hearing,he or she " doubled down" on a comment .
another one :" bad optics".
There are few more but can't remember right now.
Great thread.
I do get burn marks on my projects occasionally but I stopped trying to find out what could possibly be the cause of it , I just change the sandpaper roll and put on a new one to...
Does any body like Cher? lol or is willing to admit it?
JK.
Guinevere is the brand I remember seeing often mentioned in scroll sawing forums,the 2" (#11351) is available on eBay dot ca for $38.98 .
The newer designs / containers with spill proof nozzles are available but the older type or design is what people seem to gravitate toward, probably they are actually easier to use/pour and are...
The older cans are widely available in Canada,they are nothing fancy, no spill proof nozzles,just simple /old fashion gas cans. from what I've heard these older type of cans are harder to find in the...
Incra lift gets very positive reviews,great choice.
Thanks Aaron.
If you don't mind me asking, what router insert are you going to use with that table? Aluminum,thick phenolic ? I'm planning on building a router table myself and thinking of using a Kreg insert...
Mel, you are absolutely right about the kid's character, throughout this ordeal he seemed so calm and collected at that young age,didn't seem phased by anything that was happening at all, never cried...
Interesting finds but I bet none compares to what I found years ago , one summer's day in early seventies I was driving on a road near where I used to live (Montreal,Canada),this road had houses on...
Great post Ken,couldn't have said it better myself.
RIP Ali.
I've had 4 bandsaws 2x14" , 1x10", 1x9". after a good tune-up, everyone of them would have the blade riding on the front edge of the lower wheel.I know it may not make sense but they all track/cut...
Doug,I saw a router lift like the one you are describing on Dowelmax site but's just a router table top , there's no stand,Here's a picture of it and the link:
...
+1.that's how I collect the dust from my DW735, I disconnect the hose that goes from DD to the shop vac(otherwise some dust still gets inside the shop vac), the force from the planer fan is so...
This is how I would set up the Dowelmax for end to face joints:
http://www.dowelmax.com/diy-woodjoints.html
http://www.dowelmax.com/images/diy6.jpg
When I was into freshwater fishkeeping hobby I used to hear a lot of praises on Workhorse ballasts made by Fulham Lighting, as you might know, aquarium lighting must be very reliable and must also...
You should have a look at Franklin Pro sensor710 ,it's probably the last stud finder you'll ever buy,it's accurate,the LED lights shows the location of the studs the moment you place it on the wall...
A sharp countersink bit should do the trick ,I remember a few years ago doing hundreds of countersink holes in aluminum strips ,what worked was finding the right speed for the drill press and my own...