Mine is like Glenns, but it lays down in a drawer. This way it is out of the way and easy to reach. I built a bank of drawers under my table for saw extras.
Type: Posts; User: Al Killian; Keyword(s):
Mine is like Glenns, but it lays down in a drawer. This way it is out of the way and easy to reach. I built a bank of drawers under my table for saw extras.
If you do go wit a combo machine, Get a extra spindle. My woodmaster came with one spindle and I had to change the moulding heads for the planer heads. This became a headache, so I orderd a extra...
You can leave it whole and use it for turning or you can slice it up and use it for veneer or you can slice it up and you it for boards. What it the size of it?
For the brand I use(target coatings) No. If for some reason you do,. They sell a retarder that work great for thinning it. Water will work.First check with the company to make sure is recommended.
I do not know about how that machine works, but woodmaster can make knive for any machine. Plus they have a huge selection(over 500) of knives.
Mostof them are very hard to get clean cuts on. They are more of a jigsaw then scrollsaw. Atleast any of the older ones I have used vibrated really bad and where not the easiest to use.
Moulding.;) I have a woodmaster that I put boards in and money comes out the other end.:D As far as projects scrollsaw windchimes are my best seller.
I can get pics of the one I made. It is not anything to fancy but it does the job. When I go downstairs I will dig out the camera and take a few pics.
If I am doing sanding with a hand held sander I use a chair at the table. If I am working at the bench I have a stool. Standing for me is very bad(bad back) I have two stools and one chair. The...
Take a paice of wood and steam it. Next press it in the vise and let it set for a fes hours. This way the wood will hold it shape. After it is thru you can resteam it and the wood will return to its...
Maybe they own a company in Canada? Have you tried Shop Fox yet?
I have the 26" model and love it. They do pay for themselves very quickly. Before I bought mine(used) I looked at the W&H, but it was very costley and seemed to be alot more work for setting up,plus...
Nylon string will cut thru it and leave a smooth finish.
silicone calk should not be a problem, as it does not come into contact with the wood and it is not airborne. So if is so bad, please explain. It only used on the outside of the pipe. I just do not...
Well, if I had 1k to spend and did not have a cyclone, i would get a cyclone. You seem to have a good collection of tools. Or if you are happy with the small dc get a bs or maybe. It would relly help...
I was wondering how, those of you that refinish furniture estimate prices? I first figure the rough size of the peice(sqft), then look at what finish is on there and how thick the old finish is. From...
I use a dry graphite lube. Still have a few cans left from when I worked on trucks. Anything wet will attracted dust and become a huge mess makeing more work down the road.
Any place that sells automotive paint will have the color match.
I would just fill them with clear epoxy. Let it dry and scrap smooth.
Roller skates.:D You could mount them on a board and use the for roller beds.
I know that my new shop if you turn the heat off in the winter, it will take a few hours to get it warm again. This is with the stove cranked up. Once it is warm in there, it holds the heat real...
The thing that determines the drying time is the moister in the air. The dryer the air the faster it dries. The kiln will not change the color of walnut, steaming does. Kiln are nice becouse they...
Aspen(poplar) is almost pure white and easy to stain. The case is fairly easy. Just take your time with it.
Rod, I forgot the part about standing on the ladder polishing all the T&G pine boards that cover the entire interior of the building.:D The second floor alone is 30' wide x 70' long x 12' high. Don't...
The better the system the less time you will be cleaning up the shop. A permant system will save you time as you do not need to move it around and it will pull more air, which catches more fine dust....