Search:

Thanks all. Didn't even snug it down that much. Must have seen some harsh times previously. Just ordered the Rennsteig set. Here's hoping. I'll file it down flat, center punch and heat it. MAP gas...

308638


bolt for the table lock handle sheared right off. Bummer. I have the new bolt ordered. Any thoughts on extracting the remnants of this old one? Do those bolt extractor bits work for...

for chisels as well?

fantastic!
thanks a million.

also looking for this as well:
http://i.ebayimg.com/00/s/MTA2NVgxNjAw/z/Jd8AAOSwfcVT~0qS/$_57.JPG

its an image on EBAY. I can almost make out all the info in the...

Hi all-
attempting my first deep dive into a PM 60 resto. About to tackle changing the cutterhead bearings. Manual says one bearing is an:

MRC 205SZZ

the other is a

Hoover 99 R 12
...

perfect. As far as resolution, the most important part of the decal is the grid of RPM numbers on the bottom. They're illegible on all of the images I've found so far. Thanks again for the effort.

That would be great. Thanks.
I did try OWWM. No luck.

Thnx again

Hi all
Looking for any info on new decals for a pea green PM 1150. Not the variable speed model. Specifically the step pulley RPM decal in the front.
I'd also love a high res image if anyone has...

Whichever oilstones I purchase I'm to planning on using my DMT DIA-FLAT Lapping Plate to flatten. I'm also planning on trying my Tormek for the primary bevel. At least until I get the hang of it....

Thanks all. My heads swimming a little with all the various grades and names for these oilstones.
In the end I need a coarse and fine. This is from Dans:

Soft Arkansas (Medium) is the most...

Hi all
need to purchase a coarse and fine Arkansas stone for carving gouge sharpening.

Im looking at these:
http://www.toolsforworkingwood.com/store/dept/THO/item/NO-CHRISPYE.XX

They seem a...

Agreed. This is what I'm leaning toward. Unless I scrap the idea of hanging them on the door and give that space to some other class of tools.

Thought about the magnetized strip, but I'm not a fan...

Hi guys

building a new tool cabinet and wondering if anyone has any ideas about storing all my many dividers.
I'd like to hang them on the inside of the cabinet doors. Preferably some thing that...

Hi all

just rehabbed a 190. Any tips on blade adjustment? Taps with a small plane hammer?

thanks
Mike

Thanks Derek. To clarify:Seems counter intuitive to project the blade more if it's cutting deeper on the inside shoulder of the rabbet. I was actually thinking I might have it projecting too much...

I'm Still struggling with the Veritas skew rabbet plane. Seems like more often than not I get a sloped rabbet. Deeper towards the inside. Is it set up incorrectly? Do I have the blade projecting too...

Thanks Chuck. I'll look into that.
I was able to find Zinsser clear shellac at a "hardware store" but not the de-waxed seal coat. Getting closer...

I'm in the heart of LA. Near the Silverlake area. Checked the HD, Lowes and Rockler to no avail…
Tried to order from Rockler and Woodcraft, but as soon as I enter my zipcode I get a message saying...

Anyone have any advice for obtaining solvent based finishes in California? Seems the state has determined it's best for me not to use any high VOC material, regardless of what I might think.
Can't...

Was it my imagination or did LV announce that they are releasing an attachment/addition for the MKII to help with smaller chisels etc?

Thanks guys
I'm leaning towards the LN pair, but just saw that Patrick Leach has a vintage 98/99 for sale in this months list. Only about $75 cheaper than a new set of LNs though.

Thx again

Hi everyone

about to buy a side rabbet plane (or two?)

trying to decide which way to go. Veritas all in one or the LN pair?

anyone have any experience with both? Either?

thanks

My dad has had a bunch he cut, milled and stickered years ago, and a friend of his has a sawmill up near Easton Pa.. That's the majority of it. Regardless, domestic hardwoods are much cheaper in...

Happy Holidays everyone.

Im back east in NJ, and my dad loaded up on a bunch of nice cherry, walnut and oak. Only catch is I need to get it back to LA. Has anyone ever shipped a load of lumber?...

"All of mine have been fantastic performers without a micro bevel, but there should be no reason that a micro bevel on it wouldn't work with the 30 degree angle."

yes. That's exactly what I'm...