Ok..yesterday...Had to go and bring the Boss home...(LONG story) THEN go out and pay the monthly bills, and Grocery shop....Then a trip across the street to Lowes..
On Sale!....1 x 2 x 4'....Total...
Type: Posts; User: steven c newman; Keyword(s):
Ok..yesterday...Had to go and bring the Boss home...(LONG story) THEN go out and pay the monthly bills, and Grocery shop....Then a trip across the street to Lowes..
On Sale!....1 x 2 x 4'....Total...
Ok..got all 18 runners done..
519857
However, came time to cut the pine back rails..
519858
There was only enough GOOD 1x 2 left for 1 back rail....Trip to Lowes yesterday to restock
I had...
Set the router table aside, for now...cut 18 drawer runners on the tablesaw for length..
519848
Here is about half of them....each need a tenon on each end..
519849
Nibble away...working away...
Ok, dovetail bit was done..time to change bits..
519844
There was a time, long ago, where a router by B&D was all metal, and was a clone of a DeWalt No. 610....and both needed 2 wrenches to change...
1st Router table use...needed a jig to slide along the fence..
519835
To run parts past a dovetail bit..
519836
9 "rails", dovetail "Tails" on each end...takes 4 passes
Goal was to match this...
Will do an "Up-Date" later this evening..once we get the Boss back home and settled in...
Warning: Router Table will be in use
Warning: Tablesaw will be making tenons
Weird Sign award: This...
Thinking the term does or does not include slicks?
519786
And maybe not from the realm of Timber Framers?
Shorty is 11" long..and a mere 1-1/2" wide...
Big Brother..is 15" long, and an even...
ok, to get the rebates milled..
519750
Had to move these out of the way...cauls were a might too close to my arms as they were going by..
519751
Used the Craftsman3720 to mill a 3/8" wide by 1/4"...
Curved areas near the feet, used a drum sander in a cordless drill...high rail was lower,,,with a beltsander, and couple spokeshaves..and a palm sander..until finally..
519744
The Stanley No. 80...
Up date time...the 2 sides were clamped together, inside to inside...the back stiles already have their rebates milled to house the 1/4" plywood back. Lined the back stiles up
519741
With the...
Had to replace a curvy one..
519686
Had enough "Leftovers" for that..
519687
The wide one on the bottom..isn't quite that wide, any more
The best 9 rails are all clamped up into a single...
These 2 planks..
519682
Needed to be cross cut in 24" (Roughly) lengths
519683
Then run through the rip fence at 1-3/8" width...
519684
Then needed to skinny them down to 3/4" thickness.....
Side #2 is out of the clamps..
519681
And Standing in front of Side #1...back to back...one foot will need trimmed a bit, otherwise, they match up quite nicely
2 hours and 20 minutes in the shop, today...Results?
519667
Well..there is the inside of Side #2...being glued up..
519668
Had to get 8 raised panels and 9 rails all spiffy-fied up..
519669
And...
Shopping trip..$108.86
Need to load this up..
519606
Into this space..
519607
Needed to fold the other back seat down..so the 8' long 1 x 4s will fit...The six 1 x 2x 6' were a tight...
Well..I did try to get $20 off....but..he only allowed the 10% the Mall gives...on anything over $40...
Cheer Up....Yard Sale Season has started around here...
The Boss is coming home next Wednesday Afternoon-ish...Same day as Pay Day...I get to go out, and pay the bills that morning, then go pick her up. Being released to Home Health Care.
She also...
A dry fit that also involved a panel...
519596
Did not go well...seems I will be doing this, tomorrow...again..
519597
The Dreaded Too Fat Rebate....back has said enough for today...and..
519598...
2 stiles also got their feet sawn...
519594
Was a good thing that this was the "inside" for both Stiles..
519595
As both had a few "bad" spots, all on one Face...the other face was clear...
Dry fits..first one of the day..
519591
And the Last Dry fitted rail of the day..
519592
18 Mortises were chopped and fitted to the rails, today...tool?
519593
Nothing real fancy...I just sit...
Well, that glue-up is now out of the clamps, and standing up on it's own 2 feet..
519589
Next 2 Stiles look like this..
519590
2 hours IN the shop, today...then go upstairs and mow the yard......
Set one stile on the bench and into the jig....it was marked for "INside" so set that face away from me...then glue on tenon, and a spot of glue in the center of a panel..and worked my way down to...
Rails needed to look spiffy, of course..all 9 of them..first task was deciding which face looked the best..
519555
And which didn't quite make the grade...flipped this one over..
519556
And ran...
Hmm, try again on photos..This morning worked on getting Raised Panels ready..
from this..
519552
Saw marks, burnt spots, ridges. and rough stuff..to
519553
Ready to sand to 180 grit...a Stanley...
Plan last night, was to haul a stack of supplies to the shop, and bring a hamper of dried clothes back upstairs...
Plan got changed a bit..set all these aside..
519524
Set up the #3Stile in the...