Comments such as these make me laugh. You do realize the 800b gorilla that Gass was fighting was the Power Tool Institute (PTI) which represents Black & Decker, Hilti, Hitachi Koki, Makita, Metabo,...
Type: Posts; User: John Schweikert; Keyword(s):
Comments such as these make me laugh. You do realize the 800b gorilla that Gass was fighting was the Power Tool Institute (PTI) which represents Black & Decker, Hilti, Hitachi Koki, Makita, Metabo,...
"The Ultra-Fine Point Sharpie has an extra-fine, hard nylon point for a 0.3 mm line width" from an online supplier
0.3mm = 0.0118" which is 59 times thicker than 0.0002"
As I said earlier,...
Jerry,
One path forward is just go ahead and begin building things. If at some point you see gaps or errors being introduced into the project that were from the crosscut sled, then by all means do...
Your calculation is off. Your difference of .020" is divided by 4 to give you an error of .005" over a distance of 20". You can get it closer but that is up to you. Divide by 20 to get an error per...
The Craftsman Gore Cleanstream hepa is on Amazon prime for $48.48 now
I have the Fein Turbo II 9-20-25. You use only the cloth filter OR a bag with either the cartridge filters, hepa rated or 1 micron. I use the Gorestream hepa filter and bag. Sometimes when vacuuming...
Clear packing tape, blue or green painters tape, wax paper all work for me in different situations. Scraping original Gorilla glue from parallel clamp bars sucks. PVA glue doesn't stick to clear...
I have to agree with Glenn. I too don't have any issues with blade drift on my Grizzly 14", and all I use are Olson blades. The saw is tuned well. I use the normal fence set straight and square and...
Jacob, if you can get the Jet for less than $500 I think that is reasonable. I have the Jet long bed 6" and added a Byrd head to it. The beds may require just little bit of shimming to nail it for...
My experince is that it's less about the knife and more about the blade. Once you try carbide box cutter blades anything else is garbage. My knife of choice is the ubiquitous $3 Metal box cutter...
I have have a 15 yr old DW713 and a 2 yr old Makita 2012nb. I'd recommend either the newer DW714 or the Makita with no hesitations.
Should answer your question
http://www.finewoodworking.com/item/124528/so-long-nexabond
U.S. Patents are 17 years from issue date or 20 years from filing date.
Bosch email today says Reaxx is officially available to buy.
My advice would be to expand beyond just woodworking and add metal work. You do a few projects and the next thing you know everyone and their brother wants you to build something for them.
I've...
I prefer the Stanley Lever Lock tapes over the power lock, much simpler to use, crisp tape, excellent markings, and quite accurate tapes.
I've thrown away other branded tapes because some are not...
This one must be clad in gold and rhinestones, they're asking $3500 for an old Dewalt: http://nashville.craigslist.org/tls/5541913470.html
International Tool is having 10% off this weekend, Bosch Reaxx included for $1349.
All the Cabot poly, oil and water-borne are quite specific in use, "for interior and protected exterior wood surfaces". Deck railings are not protected exterior surfaces. I would not poly outdoor...
Sounds as though you are better off making a circle cutting jig for your bandsaw to cut these arcs which will be a more versatile long term jig. Plywood platform and a pin would be more stable and...
Do you adjust your blade guard/upper guide bearings to sit close to your workpieces? That alone creates a blockade and prevents the wood from rotating up and flying at the woodworker.
I'm...
Those are great points. Woodpecker could add an extrusion underside to allow the use of clamps.
I'm also not convinced this track square couldn't be easily bumped out of square with the mount...
I own a PCS with the 30" fence on the ICS module base in a 12'x24' bow roof shed. The saw and fence have been superb.
I will say for anyone who is interested in buying the premium fence, it is...
It's a perfect press fit. Doesn't need the Fein threaded flange that their own hepa requires.
I use a Craftsman hepa filter on my 9-20-25 Turbo II. Think it should fit yours too.
http://www.amazon.com/gp/product/B00006FRJS?colid=CRRZ5NQA7TE6&coliid=IR7RDW9XLVO7X&ref_=wl_it_dp_o_pC_S_ttl
...