Search:

so do they sell plug ends at Home depot? or I can just buy an extention cord and cut the head off and use that?? does the extention cord have to be a certain kind or just the heaviest duty one i can...

I was cutting a circle out with the router and came back around and ran the cord straight over.. Anybody know who fixes things like this? It is hardwired to the router unfortunately unlike my Dewalt....

thanks for the advice Josiah!

I'm making a decorative garden gate that will be subjectect to a life outdoors and i would rather not spend too much on it. It is going to be painted a bright red. could i get away with using...

exactly what i was looking for thanks for the help guys!

i thought about doing it your way scott but for the arch i'm doing it would have been too deep of a cut.

slot cutter... good idea, never used one, can it be used on a normal router? thanks for the idea

So would you recommend you using epoxy instead of wood glue for all of the joints or just where rain is likely to pool?

Does anyone know how to go about dadoing on the concave side of an arch? below is a link to what I'm actually wondering about...

...

sometimes i feel like one of the few woodworkers in memphis. would anyone of you like to star a cooperative shop??

any suggestions for exotic woods that would be suitable for a front door that would be subjected to the usual front door abuse?

is there anything wrong with making a cabriole leg out of a glued up blank?

I've tried acetone, laquer thinner, paint thinner.. nothing is working. i can't just sand it or plane it off because the customer wants the patina and the dark oxidized color....i know... the tar...

well ok thanks for all the replies, i went ahead and braved it on the bandsaw and it cut nicely. no chips or anything. the 1/8 plexiglass had a blue film on both sides to protect the surface and i...

thanks for the help. you got me scared i think i'll just use a linoleum knife now...

Can you cut plexiglass on a tablesaw or with any other woodworking tools? thanks!

thanks for the info, now if i could figure out how to sharpen a plane without ending up with 5 different bevels

can someone give me a short list of what planes to use in what order to flatten a glued up panel?

does anyone know of a good value/quality source for replacement blades for an old stanley #4 handplane? thanks for any help

so, how do you get a smooth finish on r.o.? and i was wondering the same thing about how much to sand it off if you do you use it? thanks

minwax sanding sealer. i put the stain on there and it took it fine, thanks for the help!

Quick question, i want to seal the pores of some red oak, so i put sanding sealer on it and it is just about dry. can a stain go on over that? thanks

well its not that it is just swinging open, it feels like it is binding

ok, i'll try putting a mortise on the frame too, thanks for the help!

it is a full mortise hinge

anyone know??