I used to work for a railway salvage company, one of the jobs we had was recovering a car full of PVC beads that was on the way to become PVC pipe. The recovery involved what was basically a dust...
Type: Posts; User: will sanders; Keyword(s):
I used to work for a railway salvage company, one of the jobs we had was recovering a car full of PVC beads that was on the way to become PVC pipe. The recovery involved what was basically a dust...
Try this place for the answers.
http://www.milesstair.com/
No, don't do it. They are designed to operate in basically one orientation. Take the handle off.
I am going to be sanding down most of the walls in my house in preparation for painting and some wall paper. The issue I have is the walls are in bad shape with MANY very poor patches, I have a...
Couple of photos of my tiny shop...
That is what I did with mine ( which is in storage as it frankly overwhelmed my tiny shop) you need the serial number and model number and I think that is all. Great deal and really great service,...
BTW, The top of this thing was a real joy to put together by yourself...
Well went ahead with the delta, negotiations with the other half revealed a curious lack of enthusiasm regarding other choices. I was impressed with the assembly instructions I would say a 8 out of...
A worthy suggestion but a bit out of my budget, around $500 is what I have to work with ( much more and I will be sleeping on the floor of my shop, what with the lack of a dog house or sofa!)
Okay folks, need some help on this one. I just sold my old Craftsman 12" bandsaw with the aim of replacing it. I am looking at three saws, all 14". One is the Delta 28-276 from Lowes, I can get it...
What kind of RAS is it? I know for a fact that some of the older Craftsman( Emerson tool made ) saws have a retrofit kit including table available for free from the mfg. ( Due to some kind of class...
Has anybody tried one of those little drill press lathes? I think Grizzly sells them. I know it will not perform like a real lathe but all I want right now is something to play with and try to make...
I use one of those for a Halloween prop control. I use it to control a drill motor and notice that sometimes it won't turn it off. As already said it is really only for lights and I think even says...
You could always try one of those kits to convert a couple of steel drums into a woodburning stove. I have never used one but it makes sense in a wood shop and it is not too expensive.
...
I mispoke about the bit being an "insert" it is just a regular carbide bit. Thanks for all the advice.
No expectations. This is my first time using a router at all. I am trying to learn and wondering if what I am seeing is right. What I need a "Routers for dummies" book!
I think there is some false logic here. Your DC will move the same CFM of air no matter how many blast gates are open. IE one gate open at 100cf will move 100cfm at that point 2 might move 50 cfm...
1/2 inch and tried about 1/2 inch.
Okay, bought a couple of used Whiteside carbide insert straight router bits the other day ( 5$ a pop sounded good) and need to know, how sharp should the inserts feel?Reason I ask is that I tried to...
I really never thought about renting a wood chipper! (DOH!) Some of the logs are a nice size but I could easily split them.
Thanks!
Why? I am in the electronics field and I fail to see why you want this. There are some meters made to monitor current draw on operating machines but those are usually wired in. A clamp on ameter is...
and keep them. This is a little strange but I have a bunch of smaller pecan logs that I want to make into chips for my smoker. Any ideas?
I think these guys have you beat..
http://www.youtube.com/watch?v=NipvtsqNd88