I have a Trimaster and 2 each Resaw King blades. The Tri M gives you the better
cut.
I have a 1" wide/ 3 tpi on a 20" delta. Very happy.
Dan O'Sullivan in Durham NC
Give me a call if you...
Type: Posts; User: Dan O'Sullivan; Keyword(s):
I have a Trimaster and 2 each Resaw King blades. The Tri M gives you the better
cut.
I have a 1" wide/ 3 tpi on a 20" delta. Very happy.
Dan O'Sullivan in Durham NC
Give me a call if you...
Here's an interesting look at the work of George Wilson and J. Laubach in the Colonial Williamsburg magazine from a few years back.
http://www.history.org/Foundation/journal/Holiday06/tools.cfm...
I would lean toward the bandsaw if you have one. I think you get better results without the extra step and the extra clean up. I use a good resaw blade and the tablesaw step seems to create a little...
I could not figure out how to edit an existing message so I could just add these photos. A couple requests to see the 2 pieces together. Here goes:
Hey Steve
You made a great suggestion: Sherwin-Williams pore filler(D70 T1). It is the best grain filler I have used in many years. I would add some color to it if needed. The fine silica does not...
Did you work from published plans? Or your own?
My dream is to someday be good enough to build something like this.
Thanks for the inspiration.
I used a plan presented in FWW 154-6 by...
Very nice work Dave. Can you tell me a couple things:
1. What is the radius of the fluted column?
2. How many flutes can you get in the quarter?
3. What is the flute dimension here?
Thank you...
Here are a few more photos to look at. If you want to see the building process/evolution, you can look at some play by play stuff here:
...
Coming down the final stretch on a project I posted earlier. Here are some photos. I will post the final shots in a week or so. I need to fit the center escutcheons for the drawer locks.
Lou...
Have a few brushes also - the neat thing about a dedicated shellac brush is that you just straighten any wayward fibers, and put it on the shelf to dry/harden. Few minutes in DA and the hardened...
Lou
I am building a similar desk and I wondered?? Did you put locks on all of the drawers in the desk? I'm just not sure if its worth the cost/trouble?
In the past(3 other desks) I have...
I would not advise buying this tool. Save your money and practice sawing to a line scribed with a knife. Keep it simple and learn to cut to a line and fit the joints.
Just my 2 cents. By the way,...
Zach I would go to an art supply shop in your area and get a color wheel. In my case, I bought a few poster boards(paper) and did some experimenting with blending colors and playing with the...
Narex chisels are an excellent buy. Google them,and you can get them cheaper elsewhere. gw
I have a set of the Narex chisels that I bought a couple years ago as beaters. Truth is: I use these all...
Nate
Things are a bit tight here in NC right now so I don't think I can make Maine this summer. By the way, I get back to Alstead/Marlow most summers to see old friends most every year. I have...
Dave
Its funny how the sharpening thing takes on a life of it's own. I have read lots of messages about going to 8000 stones and other very fine grits. I have not seen the projects(photos) that...
Hello all
I am debating what course I would like to attend at the WBS in Maine. I know the basic fundamentals course is good but I want to jump into the lapstrake course.
I am an experience...
Scott
I use your approach now and I have done this over the years with good results. Lately, after reading a blurb by a finisher that used to write in FWW(woman out in NM)about sprinkling...
Well sometimes seeing is believing? I used the Lenox TriMaster to cut the veneers for some drawer fronts form a crotch walnut board. The six veneer sheets 1/16+ were really consistent and easy to...
Lenox Trimaster 1" : 2/3 var tpi, 1/16" kerf, carbide
Lenox Diemaster2 1/2": 6 tpi hook, 0.035" kerf, bimetal
Lenox Woodmaster CT 1": 1.3 tpi, 0.051" kerf, carbide
In my experience, I've found...
I've cut a lot of wood on the thing - so much that I've worn out four Resaw King blades and one Lennox CT carbide blade on it. Equipped with this kind of blade, the saw just cuts straight ahead. I...
You didn't say which curly you had?? Red or Sugar. They are different in the surfacing mode. Is the wood air dried or kiln dried?
Sugar maple(hard white) that is kiln dried is a bear. You can be...
Ryan
I can't help but wonder about the expansion on the lid? You have some cross grain there??
dan
Years ago I got some used lacquer thinner from an auto body shop. I pour a little of this unusable thinner in a metal tray, drop the blade in and 10 minutes later the blade is very clean. Pour the...
Like Glenn I use the tablesaw with a thin blade. The bandsaw just won't get it straight enough. If you want to build a box in the future and not need the hardware this box might be an alternative.
...