Thanks for all the info. My motor was losing power. Ive had it for over 10 yrs so i figured it might need greased. However I also considered that I put new start and run caps about yrs ago. Start...
Type: Posts; User: Karl Card; Keyword(s):
Thanks for all the info. My motor was losing power. Ive had it for over 10 yrs so i figured it might need greased. However I also considered that I put new start and run caps about yrs ago. Start...
I have a baldor 7.5HP BALDOR 3450RPM 213T TEFC 1PH MOTOR L3709Ton my table saw. What type of grease should I look for to put grease in the grease or zirk fitting?
Thanks. Many good ideas here.
I need a blade insert for my delta rockwell. The original one is very heavy and is metal. I dont have a problem making one out of wood
but my question is will the blade make a wood insert rise up...
Fascinating. I have a set of 123 blocks, as soon as I get home from work I have to try that.
Thank you, I would not have thought of that.
Does anyone know where I could get 1 inch wide miter bars for an old delta/rockwell 12/14 table saw? I will make my own if I have to
but I was hoping to try and find some that are aluminum or steel...
Stylecnc stg 6090. That is what I really want. Input gladly welcomed
Being that I have to have financing options the long mill is out...... xcarve and shapeoko offer financing. I like the shapeoko over the xcarve. Should be ordering the shapeoko xxl next month. ...
The thing that bothers me about xcarve is that i am told I can use different software.... that is fine, the side rails are not as rigid as id like but they can be reinforced. The reviews I have read...
Hi folks, I am in the process of looking for an entry level cnc. Understand that I do not have 8K to sink into a cnc.
I am looking at the xcarve, dwc1824, and onefinity and also shapeoko.
...
I dip my pens in deft laquer. I do this 3 times. Then very lightly sand with 600 grit then put a dab of eee wax on it and i have a glass clear finish that makes the wood look like 3d. Deft is...
I want a protective coating on this because they have young grand children that visits very frequently.
I have used the cedar oil and find it disgusting. I am thinking of taking them a few bags of the cedar shavings and use that. I can always make more shaving if they need it.
I am seriously thinking of using a clear epoxy finish. I have never used epoxy and this isnt a paid job but a Christmas gift and I feel I need this to have a finish on it since these people smoke...
I am making a tv stand out of cedar for a friend. They chose cedar for looks and the "smell". So I am wondering how many problems will I create if I only finished the sides and tops of the shelves....
I have the 16/32 performax and the only p0roblem I have had is keeping the drum straight. I have bought an upgrade bracket that I still have not installed yet that is support to keep the drum in...
I ended up getting a Baldor single phase 7.5 hp motor. Needless to say it does not stall.... Got the baldor freshly redone for $300. Very heavy motor...
I thank you all very much. Very good info.
I am starting a project and will be using Odies Oil as a finish. I saw a piece where a guy sanded to 1200 but not sure if it was 1200 or P1200 but then used odies oil and I mean to tell you it was...
Hi all,
I am looking for a descent set of 5 inch sanding disk that will cover grit from 120 to about 1200. Does anyone know of a company that sells a set that covers this or am I going to have...
I would be very interested. 99 percent of my pen blanks are imported exotic woods.
Lee makes sense but at the same time I do actually enjoy using my machinery to make rough wood nice. Plus I am sitting on about 1700 board feet of kiln dried cherry, sassafras, hickory, maple,...
Thank you very much. My thoughts were pretty close but not quite same order. But I see the reasoning and that is what I was after.
Thanks. I just need to start.