Search:

I would try the way it was wired. Hot White-220v-red. Not sure why they did not use the black instead of the white. Those are the power in wires right? The 3 wires going into the motor 2 hot and...

Jerry, It is a nyloc nut.

For the rest of you SCM shaper owners you may want to check for a grease cup. Fill cup with grease and tighten up now and then I guess. Note hole at 12 o clock...

Warren, I could turn it over. It has a slider that would have to come off also.

SUCCESS,519496519497519498519499519500It was a pain in the hiney. 3' bar to get loose, but it is out. Thanks all.

Thanks for ALL the ideas. My first attempt failed, it is 8pm and I quit for the day. I took a 2" socket and welded 3/16" key stock inside in 4 places. I knew better than try a impact gun, but the...

Here is what I am looking at, 519442It is right hand thread and 1.730 or so inside socket dimension.

Bill, I have the sockets for Fords. They are to big, will check auto part to see if there are smaller ones that may work.

Jerry, This nut is up in the spindle pulley so I think I am stuck making...

Trying to get the nut off holding the pulley. It is not a hex but round with 4 slots on it. Thinking I need to make a socket or has anyone found one to match?

Jim, I will try there. The T130 does not have a serial # tag on it but will try there with out the #s and see. Thanks

Jerry, I have not found a good parts break down with google?

Jared, I read that but have not found any good info, just that they changed theirs.

Has any one here done one? Looking for suggestions, thanks.

Well this has been some interesting reading. I am thinking of making my own folding pork chop. I have not moved the machine into my wood shop yet. I hope to make it spring loaded, time will tell if I...

Well they did not grind this one length wise.516742The grind marks or what ever they are arc out each way from the cutter head.

Thanks for all the feedback on the guard and the Tersa. I am impressed with the machine and hope to find a manual for it. Even the wiring they did well. I have it out to see about a phase convertor I...

I picked up a PM DDS225 in a wood shop buy out. Selling most of it but the SCMI jointer. The PM sander has a broken handle, missing another. Hoping to buy the parts before I pedal it. But the one...

Well I got it cleaned up......mostly.516465 Both halves are done. I have yet to power it up. My plan for it was to put a spiral head in it. It has the Tersa knives, is the a good set up? I am...

Thanks guys, I had not thought of it being in the way. Probably why it is not there. Will the segmented ones spring return? Or will I have to move and return it?

Sorry I should have Googled searched images first.

Owners with a parts diagram? Looking for guard # and bolt/springs to hold in place. Thanks

I bought a used F410 but it has no pork chop. No guard at all. Can some post a picture of theirs? The only guards I see are the European type.

I have a Shop Fox 12" straight knives, no pork chop. Warren Pa a real hike.

Yes I am interested in the dust chute. Mine opening is 12" wide and 4 3/4" high. If yours will fit I would like it. I am in PA 16365

Thanks,
Tom

Mike, Thanks for the information. Yes keeping the saw made a base for it. I also plan to keep the fence on it, it is plenty stout. It also slides like it is on rollers, it works so well now that...

Thanks Bill. I see the one on fleebay and reached out to him. He does have the long 1" one also. I did not ask to get a price yet. Mine came off with the spanner and a 12" cresent.

Making a...

Thanks to all. After reading comments and links above I went to the manual and it does have a stub arbor.515843 I reached out to the school to see if they have one to run dado blades. I need to...

I am still on the fence but leaning towards keeping it. I have a friend who will want it if I pass. Plan to wire it up tomorrow and fire it up.

I do not think it has a stub arbor that can be switched. It is a 1"