Search:

Tried my hand at electrolysis to clean up kiln parts for my wife, and it worked great. Used a wire wheel on my cordless drill to remove the carbon buildup afterwards and must've managed to get it in...

Some will probably disagree, but try using some coarse sandpaper on the pulleys to rough up the surface.

If you are getting it from SC there should be a warranty. There was with the 20" BS I bought from them. Give a good look, watch it run, see it they will let you run a couple boards or have them do...

Delta 50-289 mobile base: around 165 on Amazon. It supports the saw and extension tables. I have had mine for over a year and it works great.

I have 2 trex decks and furniture, it works great and planes great. Try GRK fasteners for the decking and predrill. You will not need to countersink as mentioned above if you predrill and use the...

I am pretty sure that Lowes is no longer carrying the Mil. tools.

Finished the leg stands for the adjustable height outdoor table I am building. Only 1 snafu when I picked up the 2, 32" boards instead of the 34" ones. It only cost me 2.00 to remedy, so I am not...

Bob,

Unfortunately there really are no "rules" that are enforced by CL iteslf. They do not double check the flaggings to make sure a legitimate ad was not accidentally flagged. I have had ads...

I spent most of my time on Saturday and Sunday playing with my new Akeda dovetail jig. I think I would have saved 80 percent of my time had I just read the directions. The wife also convinced me to...

Friday I was able to get the plywood for my bandsaw's mobile base cut and attached to the four steel corners. I of course skipped the directions where it said to cut the plywood 1/2 long on each...

Excellent link. Thank you very much!

The link belts worked well on the drill press, and my jointer for that matter. It significantly reduces vibration and are really easy to install.

A few weeks ago I replaced A-28 belts for my Jet drill press with Link Belts. I now have a B-50 belt on my bandsaw that I would also like to replace with a Link Belt. Both belts look as though they...

I have two papers to write for class. Unfortunately I have procrastinated a little too long so I will need to get at least one finished this weekend.

Last night I was able to get my new bandsaw...

Wonderful how the world works, isn't it. Sounds very similar to my experiences with cell phone contracts. I have been a customer with one carrier for the past 10 years and every time my contract...

Please count me in. Justin

I am off to see my parents in PA this weekend. After that, I will be picking up a trailer load of gloats to share with pictures sometime next week. Hopefully my dad and I will get to work on some...

yet another vote for HF nitrile gloves. I don't even think about grabbing latex gloves anymore.

Reformatted my FIL's computer on Saturday and then enjoyed a night out with my wife and about 12 friends. We were supposed to go to a comedy club Saturday night but the fact that it was sold out...

Does anyone have any experience with Fazlok DC fittings? The price is kinda high so I figured I would check before just spending the money.

Thanks in advance,
Justin

There is one Delta 18" that does get pretty mixed reviews:

Delta 28-682 18-Inch 2 Horsepower Woodworking Band Saw with Ball Bearing Guides, 230-Volt 1 Phase
...

You may have the blade too hish, or too low. I am not 100% positive without looking it up, but I think if you raise the blade too high it will cause blowout on the back of your work.

you missed it by about 1 month. They are usually held at the Novi Expo Center.

Wow, a productive weekend to say the least. I got my grades back from my latest grad class, (102%). That energized me enough to read 1/3 of a dreadful book for my next class. I spent Saturday...

Yep, have a smile on my face until next season.

Look at it this way, at least there will not be an asterisk by the undefeated "perfect" season. The videotaping thing may go away in time.