Pay someone to organize my shop and install a good dust collection system … and add heat
Type: Posts; User: Floyd Cox; Keyword(s):
Pay someone to organize my shop and install a good dust collection system … and add heat
Randy, thank you for this information. Just for my curiosity, I'll do some test drilling with all three that were suggested. In the machinist bits for this size hole I'm assuming they need to run at...
Thank you.
Thank you guys for the help
Will Forstner bits work to drill through veneer glued to plywood or do I need to use a spade bit to help prevent tear out?
Holes are 1/4“& 1/2“
This is for the face for the clock in May 2019 wood...
Absolutely Beautiful
Such a beautiful piece!
Joe thank you, I will check this out.
Do any of you know of a man-made material (not MDF or plywood) that would be suitable for freehand routing?
Thank you...
Thought I would have a little fun Saturday doing a somewhat 50s retro clock for the workshop.
354346
Joe, can't seem to get a handle on what transfer tape is, can it be ran through a inkjet printer?
Does anyone know if routing through a glued down patten will dull a bit faster? I have always transferred the pattern with carbon paper, but the alternative sure would be a time saver.
Thanks in...
I enjoy watching these old promo's & thought this one on DeWalt might be of interest to some.
https://www.youtube.com/watch?v=HiGH0Qsu3ak&list=TLGGvObwacP0QOkxOTAxMjAxNw
What a beautiful box.
Lee, I must be overlooking something, for the life of me I cant find it... here is a screenshot of what comes up.
350424
Where can I find when my last years paid expires to the Creek started, so I will know when to renew?
Thanks in advance
really nice headboard, I have been looking at some king headboards and really wanted to make one myself... I believe I could do this one Thanks...
Thanks for all of the input, it really helps getting different perspectives.
Those of you that have a 5" Variable Speed Random Orbit Sanders could you tell me if the variable speed has come in handy for you. I am looking at the single and variable speed Dewalt.
Thank you...
Thank you all for the answers; I will do the pre-finish as suggested.
bumping ...
Pat, I didn't mention in the post but the bench is actually going on a solid outdoor surface & I installed Teflon furniture lifts.
Thank you for the comment
Should I be able to spray paint inside the tight spots on the endd with canned spray paint?
My brushing skills are awful and I do not have an hvlp setup.
I am making this for my grandson that...
Outdoor bench, was made with construction adhesive, 2X4s. finished with red oak stain & several coats of outdoor poly. Here are plans....
I really like the simplicity of it, The only thing I might do if it were mine is inlay a thin piece of flat brass stock down the length.