Article #9: Wooden Knobs and Pulls by Jamie Buxton

[Don Baer]

Thanks for the article Jamie, and thanks for the ideas. Nice examples, too. I hadn't thought of tapping hardwood for machine screws, but it makes good sense.

- Vaughn

Vaughn,
I do it all the time, typicaly a 10-32 screw works well and I get the ones with the big heads from my local ACE store. Or use fender washers.

[Tom O'Donnell]

<TABLE id=HB_Mail_Container height="100%" cellSpacing=0 cellPadding=0 width="100%" border=0 UNSELECTABLE="on"><TBODY><TR height="100%" UNSELECTABLE="on" width="100%"><TD id=HB_Focus_Element vAlign=top width="100%" background="" height=250 UNSELECTABLE="off">So Pleasing to some one else having a go at making individual handled for their cabinets so rewarding I trust you have seen a sample of my work
Tom
</TD></TR><TR UNSELECTABLE="on" hb_tag="1"><TD style="FONT-SIZE: 1pt" height=1 UNSELECTABLE="on">
</TD></TR></TBODY></TABLE>

Very

[Jack Ferrell]

Excellent article. I thought about it, even had saved styrofoam. Now that I have some ideas, I'll go for it.