[OP]
Member
Recently I read something that spoke about using a yellow or golden transtint then putting a pigment stain on oak for a mission oak look. IIRC it said that the dye would impart a warm glow to the wood that was missing with simple stain. There was alot more to the pieice I did not read but would like to.
Does anyone kow where I might find this writing????
TIA , Ken
If you can't fix it with a hammer, you have an electrical problem.
Moderator
Do a search on Finewoodworking online.
I read a similar article there on coloring mahogany. I bet the technique's the same.
Member
Homestead Finishing has an article and recipes for Mission finishes.
http://www.homesteadfinishingproduct...rev11-2009.pdf
[OP]
Member
Rob,
I think that will work... Thanks for your help... Shawn, I'll look online aqs well.
Thnaks again guys... Ken
If you can't fix it with a hammer, you have an electrical problem.
Posting Permissions
Reply With Quote