More updates......
B,
Continued......
B,
...........
B,
Last edited by Brian Weick; 02-04-2012 at 8:54 PM.
still uploading......
B,
Looking very good! I am enjoying the progress.
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.
Yesterday I decided to finish the hinges for the enclosure door and blade access box. I decided to put a little "Bling" into both doors by using a brass piano hing for both. I am very happy with the outcome and I think it will present itself very well...
The enclosure boxes both the wheel enclosure and blade access box are 11ga steel plate and the doors were made from 12ga.
I cut off the remaining bolts flush to the steel plate panel door/ the enclosure and blade access box after the hinges were mounted.
B,
Last edited by Brian Weick; 02-08-2012 at 9:31 PM.
Keep it up, she is looking great!
Of all the laws Brandolini's may be the most universally true.
Deep thought for the day:
Your bandsaw weighs more when you leave the spring compressed instead of relieving the tension.
Sweeeeeet.
Where did I put that tape measure...
OK.....
next dump of snappers...
Here we go!!!!.......
B,
This is the last of the pics till next the next round....
B,