Results 1 to 8 of 8

Thread: Spare Banjo for 3520

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 06-06-2011, 2:45 AM #1
    Rasmus Petersen's Avatar
    Rasmus Petersen
    Rasmus Petersen is offline [OP] Member
    Join Date
    Nov 2007
    Location
    Odense Denmark
    Posts
    354

    Spare Banjo for 3520

    I want to get a replacement banjo for my 3520 and was looking at Oneway. but im thinking the banjo for the 1640 is the right one. Its the same hight as the one for the original 3520..

    So looking for information on the overall length of the 1640 banjo, and if all myt 3520 fitted toolrests will fit?

    Any advice and/or information is very welcome.
    Last edited by Rasmus Petersen; 06-06-2011 at 10:28 AM.
    Rasmus Petersen - woodturning.dk.
    Itīs not a failure itīs a design opportunity
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules