I think that gap between the two sheets (no matter how tight) is the culprit. It it essentially a break in the air path. For example I can't stack two sheets of ply on my spoilboard and expect the top sheet to be held firmly.
I think that gap between the two sheets (no matter how tight) is the culprit. It it essentially a break in the air path. For example I can't stack two sheets of ply on my spoilboard and expect the top sheet to be held firmly.
Grothouse Lumber Company
Andi Stratus Pro, ILS12.150, Solidworks 2012, AutoCad 2012, MasterCam X6, Coreldraw X6