I've just built a small enclosed 4' X 7' shed attached to the outside of my shop for my 3hp dust collector and 20-gallon vertical compressor. My dust collector will pull from inside the shop and discharge back into the shop to maintain heated/cooled air.
My question is regarding shed ventilation since the 3hp dust collector motor will produce heat and the compressor will as well and I live in Louisiana. Should I install 1 gable vent near the roof or, 2 gable vents near the roof on opposite walls to provide cross-ventilation?
Will either of these solutions be ok for the compressor or should I pipe the intake filters outside? Even though the shed will not be climate controlled other than the vents, locating the filters outside will introduce more humidity to them.
I may be overworking this but would appreciate any advice.