Search in the Turning forum with the search term "stabilizing". For instance http://www.sawmillcreek.org/showthre...ht=stabilizing
Further poking around in the turning forum led me to this site: http://www.stabilizedwood.com/wssi.shtml
Search in the Turning forum with the search term "stabilizing". For instance http://www.sawmillcreek.org/showthre...ht=stabilizing
Further poking around in the turning forum led me to this site: http://www.stabilizedwood.com/wssi.shtml
Last edited by Jamie Buxton; 08-25-2012 at 10:24 AM.
Cactus juice; http://www.turntex.com/index.php?pag...art&Itemid=121
It's a little bit of a process to use but it adds a bunch of strength.
PM sent with a reference to the "other forum". Publicly, I'd contact the guy that sells the cactus juice and see if he'd do a sample and/or do them on a fee basis.
How much stronger than a riven wood bent lamination would you need?
SMith and Company's CPES Penetrating 2 Part Epoxy. Good stuff for impregnating wood.
Sawdust is some of the best learning material!