I just got a new tube for my VLS200 and while updating the hardware, I thought I'd try to set up my laptop. I downloaded what I thought was the proper driver but could never get it to run. VS owners, what driver do you use for the Windows 7 OS?
I just got a new tube for my VLS200 and while updating the hardware, I thought I'd try to set up my laptop. I downloaded what I thought was the proper driver but could never get it to run. VS owners, what driver do you use for the Windows 7 OS?
Growing older is mandatory.
Growing up is entirely optional.
Remember; it's never too late to have a happy childhood.
James,
Download this driver it will work with both 32 and 64 bit
http://www.ulsinc.com/downloads/#
Note this is for the VLS 2.30 & 3.50 if you have the VL 200 / VL300 you need this driver
http://www.ulsinc.com/downloads/#
Last edited by Mike Mackenzie; 10-16-2012 at 2:31 PM.
Mike Mackenzie
Sales and Service of Universal Laser Systems
Got some guidance from Universal and they got me going. I had some issues between the older firmware in my laser that needed fixing before the software worked correctly.
Jim
Growing older is mandatory.
Growing up is entirely optional.
Remember; it's never too late to have a happy childhood.