Angle Setting Jigs

[David Cefai]

Derek, I never thought of including the blade itself in the setup!

However it won't work for woodturning gouges so I'm considering spacers to clip onto the jig.

What I would like to make is a single tool which adjusts for angle, blade thickness and wheel diameter but this may be OTT.

Thanks to all for the inputs.

[Brian Thornock]

Derek has awesome ideas. I personally like to do a lot of my sharpening freehand, so the initial hollow grind is usually 25 degrees between the cutting edge and opposite side of the bevel, if that makes sense.