My Plans for my Homemade Monster style Hollower

[Harry Robinette]

Here is what I made my hollowing system from it's just some drawings I did to keep me kinda straight. Most of it was done from my head and then just eyeballed. Your all welcome to use this if it makes sense to you.

001.jpg002.jpg003.jpg
sorry hope this helps but thats the best pictures I could get.

[Harry Robinette]

001.jpg This is so you can read the 21/32" hole size

[allen thunem]

is this a design you came up with or one you have taken bits and pieces from based on other systems?

[Joe Watson]

Very kind of you to share, thanks.

[Harry Robinette]

I look at a lot of hollowers and made mine with what I had and there are very few that aren't welded, so I made this with no welding.The cutter's I made for it are pictured right around this post somewhere.