In my opinion, the Kreg table is very over-priced and you would be FAR better served by buying a few parts and building your own setup.

I bought an excalibur cast iron top and a jessem rout-r-lift II and hung it on the wing of my table saw with a hitachi 2.25 hp router, and that setup is an absolute joy to use for a total cost of around $450, including the router and a shop-built split fence that piggybacks on my table saw fence made from scraps. A freestanding cabinet with dust collection would cost maybe another $50-$100 for materials, and you can build in drawers to keep all your bits and pieces close at hand, which is another huge plus.

So for around the same price plus lets say a few of days labor, you end up with a vastly superior setup.