Well, not trying to out do Bob, but I was told I should post one of these... Well, thought I'd post them both. They are both just roughouts. Won't be able to finish turn them for a while.
First one is some spalted ambrosia maple. 27.5" across. Blank was 107 lbs. when I mounted it to the lathe. Ended up 18.6 lbs.
IMAG0081 - Copy.jpgIMAG0082 - Copy.jpgIMAG0083 - Copy.jpgIMAG0085 - Copy.jpgIMAG0086 - Copy.jpgIMAG0088 - Copy.jpgSANY2216 - Copy.jpg