Jointer knife Set Up

[George Bokros]

My jointer has started to taper stock edge to edge so I guess the knives have slipped. I have looked at several jigs to set up the knives.

1.) Jointer Pal ~$50
2.) MLCS 9397 Jointer set Up Jig ~$70
3.) One Way Multi Gauge ~ $95

Jointer Pal uses rare earth magnets to hold the blades in position.
MLCS uses magnets but allows for micro adjustments
One Way Multi Gauge utilizes a dial indicator to measure blade height in relation to the out feed table.

What do you use / recommend.

I am leaning to the One Way but cost seems steep but is definitely more accurate.

Thanks for your input.

George